Your Selected Vehicle
Parts for your 2012 Toyota Land cruiser-Headlight bulbs
Explore 4WD & Adventure
OEX Voltage Reducer 24V To 12V - Switch Mode Single Circuit - 15A (With Memory wire for Radio) - ACX7202
Narva Battery Master / Isolation Switch Lever Type With Lockout (Contacts Rated 250A @ 12V) - 61064
Narva Battery Master / Isolation Switch Lever Type With Indexing Post (Contacts Rated 180A @ 12V) - 61074
2012 Toyota LandCruiser 200 Series Headlight Bulbs
Headlight bulbs are absolutely relevant and used on the 2012 Toyota LandCruiser 200 Series. According to Toyota’s Owner’s Manual and the Toyota Electronic Parts Catalogue (EPC), this model uses replaceable bulbs: many VX and Sahara grades run HID (xenon) low beams using D4S bulbs with auto-levelling and washers, while GX and GXL typically use halogen reflector lamps. High beam across the range commonly uses HB3 (9005) halogen. These configurations align with Toyota workshop literature and parts listings for the 200 Series.
On this LandCruiser, the headlight bulbs do the heavy lifting for safe night driving and poor-weather visibility, meeting ADR requirements and keeping the big 4x4 visible to others. HID setups give a crisp, bright low beam with a defined cut-off, while halogens deliver reliable, easy-to-service illumination. Either way, bulbs are wear items—output can fade over time—so proactive checks during regular servicing are a smart move.
For maintenance, they’ll want to:
- Match the exact bulb type: D4S for HID low beam (VX/Sahara), HB4/9006 for some halogen low beams (GX/GXL), and HB3/9005 for high beam. Confirm by VIN or lamp markings.
- Replace in pairs to keep colour and brightness consistent.
- Avoid touching the glass with bare hands