Your Selected Vehicle
Parts for your 2012 Nissan Pulsar-Batteries
Explore 4WD & Adventure
2012 Nissan Pulsar Batteries
Technical sources including the Nissan Pulsar (C12) Owner’s Manual electrical section and common Australian/New Zealand battery fitment catalogues from Century/Yuasa and Bosch confirm the 2012 Pulsar is fitted with a 12‑volt lead‑acid starting battery. It’s a core component of the car’s electrical and starting system, so batteries are absolutely relevant to this model.
In the 2012 Pulsar, the battery supplies the cranking power to start the engine and stabilises voltage for everything from the ECU and fuel pump to lights and infotainment. Once the engine’s running, the alternator recharges the battery, but short trips, accessory loads, and age will gradually wear it out. Most examples use a conventional flooded lead‑acid battery sized to the JIS standard, commonly noted as NS60L/55B24L or sometimes 55D23L depending on variant