Your Selected Vehicle
Parts for your 2012 Nissan Pulsar-Batteries
Narva Model 18 LED Side Marker/Cabin Marker/FEOM Light Amber 10-30V - 91800
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Narva 9-33 Volt Surface Mount LED Side marker lamp(red/amber) with Chrome cover and 0.5m cable - 96802
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Explore 4WD & Adventure
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Narva 9-33 Volt Surface Mount LED Side directional indicator(amber) with Black cover and 0.5m cable - 96842B
2012 Nissan Pulsar Batteries
Technical sources including the Nissan Pulsar (C12) Owner’s Manual electrical section and common Australian/New Zealand battery fitment catalogues from Century/Yuasa and Bosch confirm the 2012 Pulsar is fitted with a 12‑volt lead‑acid starting battery. It’s a core component of the car’s electrical and starting system, so batteries are absolutely relevant to this model.
In the 2012 Pulsar, the battery supplies the cranking power to start the engine and stabilises voltage for everything from the ECU and fuel pump to lights and infotainment. Once the engine’s running, the alternator recharges the battery, but short trips, accessory loads, and age will gradually wear it out. Most examples use a conventional flooded lead‑acid battery sized to the JIS standard, commonly noted as NS60L/55B24L or sometimes 55D23L depending on variant