Your Selected Vehicle
Parts for your 2012 Nissan Navara-Headlight bulbs
Hella H4 Headlight Bulb 12V P43T 38 Cool Blue 60/55W - XD1260/55CB
Explore 4WD & Adventure
Hella H4 Headlight Bulb 12V P43T 38 Long Life 60/55W - XD1260/55LL
Narva H4 Headlight Bulb P43T Plus100 Long Life 24V 75/70W 1 Pce - 48874BL
Narva H4 Headlight Bulb P43T 38 Blue Plus 110 12V 60/55W 2 Pce - 48532BL2
Repco H4 Headlight Bulb High Watt 24V 100/90W P43T Bl - RH42410090BL-2
Narva H4 Headlight Bulb P43T 38 Intense Blue Globe 12V 60/55W - 48472BL
Hella H4 Headlight Bulb 12V P43T Ultra Plus 150 60/55W - XD1260/55UM
MaxiTrac H7 LED Headlight Bulb Pair, 12/24V 5600Lm 6000K - MTLG-H7
Repco H4 Headlight Bulb Performance Long Life 12V 60/55W P43T38 - RH4LLBL-2
Hella H4 Headlight Bulb 24V P43T 38 Truckstar 75/70W - XD2475/70TS
Narva H7 Headlight Bulb Px26D Blue Plus 110 12V 55W 2 Pce - 48535BL2
MaxiTrac H8/H9/H11 LED Headlight Globe Pair, 12/24V 5600Lm 6000K - MTLG-H8
Narva H4 Headlight Bulb P43T 38 Intense Blue 12V 60/55W 2 Pce - 48472BL2
2012 Nissan Navara headlight bulbs — what they do and when to replace them
Headlight bulbs are absolutely used on the 2012 Nissan Navara. Nissan’s own technical literature — the 2012 Navara (D40) Owner’s Manual and the D40 Service Manual (PG: Exterior Lighting) — specifies halogen headlamp bulbs for this model. Most AU/NZ D40 grades run an H4 12V 60/55W dual‑filament bulb for combined low/high beam, while some higher trims list separate bulbs (H11 low beam and HB3/9005 high beam). Always confirm by checking the owner’s manual or the bulb markings under the bonnet.
On a working ute, those bulbs pull a lot of weight: safe night‑time visibility, being seen in foul weather, and staying roadworthy for WOF/RWC. Their job is simple — throw a consistent, ADR/NZTA‑compliant beam pattern so the driver can spot hazards and the Navara can be clearly seen by others.
There’s no fixed service interval for halogen bulbs, but light output slowly fades with age. Sensible servicing for a 2012 Navara includes quick lighting checks and replacing bulbs in pairs to keep brightness even. Stick to the specified wattage, higher‑watt bulbs can overheat the reflector or wiring and may step outside compliance.
- Access and replacement: Open the bonnet, remove the rear dust cover from the headlamp, unplug the connector, release the spring clip, then withdraw the bulb. Fit the new bulb without touching the glass, secure the clip, refit the cover and connector.
- Good practice: Wear gloves, keep the bulb clean (use isopropyl alcohol if accidentally touched), and verify headlight aim afterwards.
- If lights don’t work: Check the relevant fuses and headlamp relays in the IPDM/engine bay fuse box, inspect earth points, and confirm the connector isn’t heat‑stressed.
During routine servicing, it’s worth cleaning the outer lenses, checking for haze or moisture inside the assembly, and making sure the beam alignment is on spec. If considering LED or HID conversions, note that many drop‑in kits aren’t legal unless the housing and levelling/wash systems are certified, stick with quality, ADR/NZTA‑compliant options.
Whether it’s an H4 setup or the H11/HB3 combo, keeping the Navara’s headlight bulbs fresh, correctly aimed, and within spec is an easy win for safer night driving and a smooth WOF/RWC check.
Popular questions about 2012 Nissan Navara headlight bulbs
What headlight bulb type does a 2012 Navara use?
Most AU/NZ D40 models use an H4 12V 60/55W dual‑filament bulb. Some higher trims use separate bulbs: H11 for low beam and HB3/9005 for high beam. It’s best to confirm with the owner’s manual or by checking the existing bulb markings before buying replacements.
Should both headlight bulbs be replaced at the same time?
Yes, that’s recommended. Halogen output dims over time, so replacing in pairs keeps the beam pattern and brightness consistent side‑to‑side, improving visibility and avoiding an unbalanced look.
Are LED headlight upgrades legal on a 2012 Navara?
It depends. Many plug‑in LED bulbs in halogen housings won’t meet beam pattern and compliance requirements. To stay legal for WOF/RWC, use approved components that meet ADR/NZTA standards, and ensure correct aiming. When in doubt, seek advice from a licensed inspector.