Your Selected Vehicle
Parts for your 2012 Mitsubishi Outlander-Headlights
Explore 4WD & Adventure
Narva Sealed Rocker Switch Off/On SPST 12V Blue Illuminated (Contacts Rated 20A @ 12V) - 63123BL
OEX 3mm Twin Core Automotive Cable, Figure 8, Red With Black Trace - 4m Roll (NZ Ref.151) - ACX0802-4M
OEX 6 B&S Twin Core Battery Cable, Red / Black With Black Sheath - 4m Blister Pack - ACX0928-4BL
2012 Mitsubishi Outlander headlights
Headlights absolutely are fitted to every 2012 Mitsubishi Outlander and are essential for road use. This isn’t optional kit: Australian Design Rules (ADR 13/00 and 46/00) and the NZ Transport Rule: Vehicle Lighting 2004 require compliant headlamps on passenger vehicles, so the Outlander’s lighting is both relevant and mandatory.
On the 2012 Outlander, headlights exist to help the driver see clearly at night and in poor weather, and to make the vehicle visible to others. Most AU/NZ variants run halogen reflector units (commonly H11 low beam and HB3/9005 high beam). Some higher trims or certain markets may have factory HID/Xenon low beams (typically D2S) with auto-levelling and washers. Either way, the system is engineered to balance light output with correct beam cut-off so oncoming traffic isn’t dazzled.
As part of routine servicing, it’s smart to check the headlights every 10,000–15,000 km or at each service visit. If output looks yellowed, patchy or one side is dim, the bulbs are likely ageing. Replace halogen bulbs in pairs to keep the beam colour and brightness matched. HID capsules fade over time too