Your Selected Vehicle
Parts for your 2011 Toyota Land cruiser-Headlights
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Explore 4WD & Adventure
Narva MDL38 Stop/Tail/Indicator Red-Amber Lens LED 10 to 30V - 2 Pce - 93812BL2
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Narva Model 18 LED Side Marker/Cabin Marker/FEOM Light Amber 10-30V - 91800
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Narva 9-33 Volt Surface Mount LED Side marker lamp(red/amber) with Chrome cover and 0.5m cable - 96802
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Narva 9-33 Volt Surface Mount LED Side directional indicator(amber) with Black cover and 0.5m cable - 96842B
2011 Toyota Land Cruiser Headlights: purpose, care and when to replace
Headlights are absolutely fitted to the 2011 Toyota Land Cruiser and are essential equipment. This is confirmed by Toyota’s 200 Series (J200) Owner’s Manual and Repair Manual, which detail service procedures and globe types, and by Australian Design Rules ADR 13/00 (installation of lighting) and ADR 46/00 (headlamps) as well as the NZTA Vehicle Inspection Requirements Manual that require roadgoing vehicles to have operational headlamps. So yes—headlights are relevant, used and legally required on this model.
On the 2011 Land Cruiser, the headlights provide safe night-time and low-visibility driving, with low beam for general use and high beam for open-road visibility. Depending on trim and market, the vehicle may use halogen projector low beams (commonly H11) with separate high beam (HB3/9005), or factory HID/Xenon low beams (commonly D4S) on higher grades. Some variants include auto-levelling and headlamp washers with HID systems to meet regulations.
Good servicing habits keep the Cruiser’s headlights bright and compliant. Replace failed or dim globes promptly and consider changing halogens in pairs to keep colour and brightness even. Avoid touching the glass of halogen or HID globes—skin oils can shorten globe life. For HID models, ensure the levelling system and washers work