Your Selected Vehicle
Parts for your 2011 Toyota Land cruiser-Batteries
LED Autolamps 174 Series Reverse Lamp 12/24V, Surface Mount, 40cm Cable - 174WMB
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
LED Autolamps Front Indicator & Position Light LED 24V Surface Mount - 135CAT124
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
Explore 4WD & Adventure
LED Autolamps Multi Volt Amber LED Side Marker 3 SMD LEDs Blister Pack - 181AME
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
LED Autolamps Multi Volt Round Indicator Lamp With Amber Lens Recessed Mount - 102AM
LED Autolamps 10/30V LED Side Direction Indicator Light With 3m Tinned Cable - 58AM3
LED Autolamps 12/24V Stop/Tail/Indicator/Reflector With Licence Plate Lamp - 99ARLM
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
LED Autolamps 174 Series Stop/Tail Lamp 12/24V, Surface Mount, 40cm Cable - 174RMB
LED Autolamps Twin Function Side Indicator with Red Amber Side Marker RHS Multivolt - 800ARIMR
LED Autolamps 12V Front Indicator/Marker Lamp 80mm Round Blister Pack - 80AW
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
LED Autolamps Front Marker LED White With Reflector 12-24V Perm Mnt - EU38WMHD
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
LED Autolamps Multi Volt Reverse Lamp With 35 SMDS Blister Pack With Black Base - 135WM
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
LED Autolamps 12V LED Stop/Tail/Indicator Light With Reflex Reflector Twin Blister - 100BAR2
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
LED Autolamps 10/30V LED Side Direction Indicator Light With 30cm Wire - 35AMB
LED Autolamps 12/24V LED Stop/Tail/Indicator Lamp With Reflex Reflector Blister Pack 1 pce - 150ARM
LED Autolamps 9/30V LED Red Amber Side Marker Light Clear Lens 30cm Wire - 35ARMB
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker RHS Multivolt - 805ARIMR
LED Autolamps 12V Sequential Indicator Strip Light 10 Square LEDS Amber Lens Bulk Packaging - 235ASEQB
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
2011 Toyota Land Cruiser batteries
Yes, batteries are absolutely relevant to the 2011 Toyota Land Cruiser. Toyota’s 2011 Owner’s Manual and Repair Manual for the 200 Series specify a 12‑volt lead‑acid starting battery, many AU/NZ diesel variants (1VD‑FTV) are factory‑fitted with twin 12‑volt batteries wired in parallel for higher cold‑cranking capacity and accessory support.
On this Cruiser, the battery’s job is to crank the big V8, stabilise the electrical system, and keep essentials alive when the engine’s off—think ECU memory, immobiliser and clock. Dual‑battery diesel models also better handle winches, fridges and touring gear without leaving drivers stranded. Whether single or twin, a healthy battery makes every start under the bonnet feel effortless.
As part of regular servicing, smart owners (and workshops) will:
- Load‑test the battery/batteries and check resting voltage (aim for ~12.6 V when fully charged).
- Verify alternator output (typically ~13.8–14.5 V at idle with accessories off).
- Inspect terminals, clamps and earths, clean any corrosion and ensure the hold‑down is secure.
- For dual setups, confirm the isolator/voltage‑sensing relay is operating correctly.
Replacement is straightforward, but a few Land Cruiser‑specific tips help. Choose a quality unit with ample CCA—N70‑size is common on diesel models, with AGM a popular upgrade for off‑road and accessory use. Replace dual batteries as a matched pair (same brand, age, capacity) to avoid uneven charging. Petrol models generally run a single 12‑volt battery, verify size and terminal layout against the tray and clamp.
When swapping batteries, keep the vehicle powered with a memory saver if possible. After reconnecting, expect to reset the clock and radio presets, reinitialise auto‑up windows if needed. Tighten terminals snugly (don’t overdo it), and always recycle the old battery properly. Typical life is 3–5 years, shorter if the vehicle does lots of short trips or heavy accessory duty. If cranking slows, lights pulse at idle, or there’s a rotten‑egg whiff near the battery, it’s time for a test.
For touring rigs, consider a dedicated auxiliary battery with a DC‑DC charger to protect the start battery. That way, the Cruiser stays ready for the next big kilometre, whether it’s the daily school run or a corrugated desert track.
FAQs
Does the 2011 Land Cruiser come with dual batteries from factory?
Many AU/NZ 1VD‑FTV diesel 200 Series models are factory‑fitted with twin 12‑volt batteries in parallel. Petrol variants are typically single‑battery. A quick look under the bonnet or a check of the Owner’s Manual will confirm the setup on a specific vehicle.
What battery type and size should be used?
Diesel models commonly use an N70‑size with high CCA (often 750–900+). AGM is a solid upgrade for heavy accessory loads. Petrol models may use a different size depending on market and tray/clamp layout. Always match case size, terminal orientation and hold‑down fit, and follow Toyota specifications.
How long will the battery last, and how can it be extended?
Expect roughly 3–5 years. Life improves with regular longer drives, clean terminals, correct alternator output, and avoiding deep discharges. On dual‑battery setups, a quality isolator or DC‑DC charger helps protect the start battery from camping loads.