Your Selected Vehicle
Parts for your 2011 Subaru Exiga-Tail lights
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97000-1/4
Fitment Notes:
Understanding Tail Lights on the 2011 Subaru Exiga and How to Keep Them in Top Shape
The 2011 Subaru Exiga, a versatile and family-friendly vehicle, definitely comes equipped with tail lights as a crucial part of its lighting system. Tail lights play an essential role in vehicle safety, especially when driving at dusk, dawn, or during the night. For anyone owning or servicing the 2011 Subaru Exiga, understanding what tail lights do and how to maintain them properly is important to keep the car roadworthy and safe.
Tail lights are the red lights located at the rear of the vehicle that light up when the headlights or parking lights are switched on. Their primary purpose is to make the vehicle visible to other road users from behind. This is particularly vital in low-light conditions, fog, rain, or other situations where visibility is reduced. Tail lights also illuminate when braking and signalling, although brake lights and indicators are separate functions usually served by distinct bulbs or LEDs within the tail light assembly.
For the 2011 Subaru Exiga, tail lights come as part of a combined rear light cluster which includes brake lights, turn signals, and reverse lights. The tail light element itself glows steadily red, alerting drivers behind to the presence and width of the vehicle. This helps prevent accidents by giving drivers further back ample warning of the Exiga's size and movement.
When it comes to tail light maintenance or replacement on the 2011 Exiga, there are some practical considerations that make the task straightforward enough for most DIY enthusiasts, yet important enough to take seriously. Here are some helpful tips and advice for anyone looking after these essential lights:
- Check Tail Light Function Regularly. Tail lights should be tested frequently, especially before driving at night. A quick way to do this is to switch on the headlights or parking lights and walk around the car to confirm the tail lights are glowing red as expected.
- Inspect the Lens and Housing. Cracks, cloudiness, or moisture inside the tail light lens can reduce the brightness and effectiveness of the lights. If the housing is damaged or water has leaked inside, it's a good idea to replace the unit or reseal it to maintain clear, bright output.
- Replace Faulty Bulbs Promptly. The 2011 Subaru Exiga tail lights may use traditional incandescent bulbs or LEDs. Incandescent bulbs will eventually fail with use, so replacing them quickly is key to staying safe on the road. Always use the recommended replacement bulbs that match the original specs to avoid electrical issues or poor light quality.
- Consider Upgrading to LEDs. For those interested in a longer-lasting, more energy-efficient option, LED replacements are sometimes available for the tail light assembly. LEDs offer brighter, more consistent illumination and longer service life, although they may come at a slightly higher cost initially.
- Keep Clean and Free From Obstructions. Dirt, mud, or stickers on tail lights can reduce their visibility. Regular cleaning with a gentle detergent and water ensures the lights will shine brightly when needed.
- Understand Legal Requirements. Tail lights must conform to Australian Design Rules and road safety laws. This means they need to be red in colour and sufficiently bright, so any modifications or changes should respect these regulations to avoid fines or safety risks.
Replacing or servicing the tail lights on a 2011 Subaru Exiga can often be done easily at home. Typically, the rear light cluster is accessible from inside the boot, after removing or folding back the lining panel. Depending on the bulb type, a simple twist or pull action can free the faulty bulb. Then, fitting the new bulb is just a matter of reversing those steps. For LED units or complete assemblies, replacing the entire cluster might be necessary, which could require some basic hand tools and patience.
Regular attention to tail lights is more than just a good idea for safety. It helps avoid unexpected roadside issues and keeps the car compliant with vehicle standards. Because the Subaru Exiga is a popular vehicle for families and those needing ample passenger space, maintaining the tail lights ensures this multi-purpose vehicle stays clearly visible on the road for all kinds of outings - from school runs to weekend adventures.
Overall, the tail lights are definitely relevant and an essential part of the 2011 Subaru Exiga. They help other drivers see the vehicle, signal intentions, and increase overall safety. Treating them with a bit of regular care will help keep your Subaru Exiga looking good and functioning safely, no matter where your journey takes you.