Parts for your 2011 Subaru Exiga-Tail lights

2011 Subaru Exiga tail-lights — purpose, care and replacement

Tail-lights are absolutely fitted to the 2011 Subaru Exiga. This is confirmed in the 2011 Subaru Exiga (YA series) Owner’s Manual and the Subaru FAST parts catalogue, which list rear combination lamp assemblies including rear position (tail), stop, indicator and reverse lamps. Australian Design Rules and NZTA lighting requirements also mandate operational rear position lamps for road use, so the Exiga definitely uses tail-lights.

On the Exiga, the tail-lights form part of the rear combination units mounted on each corner of the tailgate area. Their job is simple but critical: provide rear visibility at night and in poor weather, clearly show braking, and signal turns. Good tail-light performance helps other drivers judge the Exiga’s position and speed changes, cutting the risk of rear-end shunts, especially on dark rural roads or in heavy rain.

Most 2011 Exiga variants use conventional bulbs in the rear combination lamps, with a separate high-mount stop lamp on the tailgate. Over time, bulbs age, sockets can corrode, and seals may let moisture in, dulling output or fogging the lens. As part of routine servicing, it’s smart to check tail-light operation with the park lights on, foot on the brake, and indicators flashing, then replace any weak or dead bulbs in pairs to keep brightness matched left-to-right.

• Look for signs it’s time to act: blown or dim bulbs, intermittent lighting, condensation in the lens, or crazing/cracks in the lens cover.
• Basic replacement steps: switch the car off, open the tailgate, remove the trim/fasteners to access the rear of the lamp, twist out the bulb holder, swap the bulb, and refit. Avoid touching glass bulbs with bare fingers and confirm the correct orientation.
• If there’s moisture inside, inspect the housing seal and vents, reseal or replace the gasket or the lamp if the housing is cracked.
• After any work, test park, brake, indicator and reverse functions, then check fuses if a circuit stays dead.

Using ADR/NZTA-compliant parts matters. Quality aftermarket or genuine lamps keep the correct colour, brightness and light pattern so the Exiga stays legal and easy to spot at night. During scheduled services or before a WOF/regos check or a long trip, a quick tail-light check is a small job that pays off in visibility and safety.

Popular questions about 2011 Subaru Exiga tail-lights

What type of bulbs does the 2011 Exiga use for its tail-lights?
Most 2011 Exiga models use conventional wedge-style bulbs in the rear combination lamp, often a twin-filament for tail/stop. Variants can differ by market, so it’s best to confirm in the 2011 Owner’s Manual or by checking the existing bulb markings before buying replacements.

Is it legal to fit aftermarket LED tail-lights in Australia or New Zealand?
Yes—provided the assemblies comply with ADR/NZTA rules, display the correct colours, meet brightness standards, and fit properly without flicker or glare. Choose reputable brands with compliance markings and keep reflectors visible.

How do they fix tail-light condensation on an Exiga?
Light misting after rain can clear as the lamp warms up. Persistent moisture usually points to a tired seal or a hairline crack. Inspect gaskets and vents, dry the housing thoroughly, then reseal or replace the lamp if damaged to prevent repeat fogging and electrical issues.