Your Selected Vehicle
Parts for your 2011 Honda Cr-v-Tail lights
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Tail Lights Maintenance and Replacement for the 2011 Honda CR-V
When it comes to vehicle maintenance, tail lights might not always be top of mind, but they play a critical role in ensuring your safety on the road. For owners of a 2011 Honda CR-V, keeping your tail lights in good working order is essential, not just for visibility during night-time driving, but also for signalling to other drivers your actions like turning or stopping. Regular checks and maintenance can save you from potential fines or accidents caused by light failures.
Before you start troubleshooting any issues, you should first ensure that your replacement tail lights or bulbs are compatible with your CR-V model. Always refer to the user manual or consult a trusted parts specialist to confirm compatibility. If you need to replace your tail lights, consider whether you are dealing with a bulb replacement or the entire tail light assembly.
- Check for any visible cracks or damage on the tail light lens. These can allow moisture to seep in, which could cause electrical issues or further damage the light components.
- If you notice one of your tail lights isn't working, check the bulb first. In most cases, a simple bulb replacement might be all that's needed. Tail light bulbs can be easily found at most auto parts stores, and replacing them is typically a simple DIY task.
- If the bulb appears to be fine, you might have an issue with the fuse. Locate the car's fuse box, typically found under the dashboard or in the engine bay, and check for any blown fuses. A quick replacement might be necessary if a fusible link has gone bad.
- Corrosion or buildup on the bulb socket can also be a problem. Removing the bulb and cleaning the socket with a bit of rubbing alcohol on a cotton swab might solve the issue.
- If none of these solutions work, it could be an electrical wiring problem that might require professional diagnostics or assistance.
Even if your tail lights seem to be working correctly, it's a good idea to include them in your regular vehicle checks. Periodically inspect your tail lights for brightness and responsiveness, especially before long trips or during wet weather months when visibility conditions worsen.
For those who take their 2011 Honda CR-V for regular servicing, most professional mechanics will include a lighting system check as part of basic routine maintenance. During these checks, they can ensure that not only are the bulbs functioning properly, but that the entire lighting system is in perfect health, keeping you safe on the road.
Overall, keeping the tail lights of your 2011 Honda CR-V in good condition is not just a legal requirement but an essential part of vehicle maintenance that enhances the safety of you and those around you. Regular checks, quick replacements of faulty components, and consulting professionals for any complex issues will ensure that your vehicle remains in top condition on the road.