Parts for your 2011 Holden Barina-Fuel pump

2011 Holden Barina fuel pump

Based on Holden/GM Service Information (SI) for the TK and TM Barina, the GM Global Electronic Parts Catalogue, and major OE supplier catalogues (Bosch/Delphi), the 2011 Holden Barina is fitted with an electric, in-tank fuel pump module for its multi‑point petrol injection. Those technical sources confirm a fuel pump is absolutely relevant to this model and year.

On a 2011 Barina, the fuel pump’s day job is simple but critical: it draws petrol from the tank, pressurises it, and feeds the rail so the injectors can do their thing. It’s an in‑tank module that typically houses the pump, strainer, level sender, and a built‑in regulator or check valve. Expect rail pressure in the ballpark of 380 kPa (about 55 psi) on most VINs, though exact figures should be checked in SI for the specific engine code.

Because the pump sits in fuel, it stays cool and quiet when the tank isn’t run too low. It isn’t a routine “service item”, but its health absolutely benefits from good fuel quality, keeping more than a quarter‑tank on longer trips, and replacing any external inline filter if your particular VIN has one. Some Barina variants use a lifetime, non‑serviceable in‑tank filter