Your Selected Vehicle
Parts for your 2011 Ford Territory-Tail lights
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97010-1-D
Fitment Notes:
Maintaining and Replacing Your 2011 Ford Territory Tail Lights
The 2011 Ford Territory is known for its blend of rugged capability and comfort, a versatile SUV with a strong presence on the road. An often-overlooked aspect of vehicle maintenance that plays a critical role in both safety and aesthetics is the tail lights. These lights are responsible for signaling your intent and ensuring visibility to other drivers, especially during night drives or adverse weather conditions.
Regular maintenance of your tail lights is crucial to keeping them in good working order. While it might seem like a minor detail compared to the engine or brakes, functional tail lights contribute significantly to road safety. Here's some guidance on maintaining your 2011 Ford Territory tail lights and knowing when and how to replace them.
- Visual Inspection: As part of your routine vehicle check, take a moment to inspect the tail lights for any visible damage, such as cracks in the lens or signs of moisture. Any damage might cause the bulbs to burn out sooner or reduce visibility.
- Check the Brightness: Keep an eye on the tail lights' brightness compared to new ones. If they start to dim or flicker, this might be an indication that a replacement is needed.
- Ensure Functionality: Have a friend or family member help by pressing the brake pedal and engaging the turn signals while you check that all lights are functioning correctly. Sometimes a bulb may have failed without being immediately obvious from the driver's seat.
If you determine that it's time to replace the tail light bulbs or the entire assembly, it helps to be informed about your options and the process. Here are some steps to guide you through replacing the tail lights on your 2011 Ford Territory:
- Select the Right Bulb: Refer to your owner's manual to identify the correct bulb type, ensuring compatibility and optimal performance. Consider upgrading to LED bulbs for better energy efficiency and a longer lifespan.
- Gather Your Tools: Basic tools such as a screwdriver, socket wrench set, and possibly some clips or fasteners will help you remove and install the tail light assembly or bulbs.
- Access the Tail Light Assembly: Open the boot and remove the panel covering the tail light assembly. Sometimes this may involve unscrewing or unclipping parts for access.
- Remove the Old Bulb: Once you access the assembly, twist and pull out the bulb that needs replacement carefully. For entire assembly replacements, unscrew or unclip the assembly, unplug any wiring and remove it.
- Install the New Bulb or Assembly: Place the new bulb into the socket, twisting until it clicks into place. If you're replacing the entire assembly, connect the wiring and fit the assembly back into the panel, making sure it is properly aligned before securing it.
- Test the Replacement: Before bolting everything back, test the new tail lights to ensure they're working correctly. Test the lights for brakes, turn signals, and lights.
- Secure Everything in Place: If all is in working order, reattach covers, panels, and any other elements you removed. Tighten screws and clips to ensure everything stays in place.
After completing a replacement or repair, it's helpful to keep a regular check on your tail lights as part of your overall vehicle maintenance routine. Not only does this ensure safety but it also helps in avoiding fines or demerit points due to faulty lights.
Consider professional assistance if you're uncomfortable with handling the electrical components or if the damage seems extensive. Automotive specialists can provide expert insight and ensure that the job is done right without compromising safety.
Maintaining the tail lights on your 2011 Ford Territory doesn't have to be arduous. With a little effort and routine checks, you can ensure they provide the best visibility and look great while keeping you safe on the open road. Proper maintenance of these lights helps keep your SUV in top shape, reflecting the care and attention you give your vehicle.