Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2011 Ford Mondeo-Headlights

Sort by
VDO Vacuum Gauge Mechanical - 150077005
VDO

VDO Vacuum Gauge Mechanical - 150077005

$231
Fitment Notes:
See More
OEX Ultimate Fuse Assortment Kit - 388 Pieces - ACX1739
OEX

OEX Ultimate Fuse Assortment Kit - 388 Pieces - ACX1739

$192
Fitment Notes:
See More
VDO Fuel Gauge 12V 73 - 10 Ohms 52mm - 301010015
VDO

VDO Fuel Gauge 12V 73 - 10 Ohms 52mm - 301010015

$150
Fitment Notes:
See More

Explore 4WD & Adventure

OEX Ignition Switch Off - On - Glow - Start - ACX3568
OEX

OEX Ignition Switch Off - On - Glow - Start - ACX3568

$100
Fitment Notes:
See More
Projecta Battery Box 260mm x 275mm x 360mm 1Pce - BB285

Projecta Battery Box 260mm x 275mm x 360mm 1Pce - BB285

$87
Fitment Notes:
See More
OEX Mini Relay Base 10 Pce - ACX1997
OEX

OEX Mini Relay Base 10 Pce - ACX1997

$69
Fitment Notes:
See More
OEX Disc Horn 24V 115dB - ACX5118
OEX

OEX Disc Horn 24V 115dB - ACX5118

$63
Fitment Notes:
See More
OEX - LED Worklight 5 LED Flood beam - ACX5708
OEX

OEX - LED Worklight 5 LED Flood beam - ACX5708

$51
Fitment Notes:
See More
Energizer AA Battery Max 20Pk - E301024101

Energizer AA Battery Max 20Pk - E301024101

$35
Fitment Notes:
See More
Narva Pipe Clamp 22mm Rubber & Steel - 56484

Narva Pipe Clamp 22mm Rubber & Steel - 56484

$36
Fitment Notes:
See More
Narva Convoluted Split Tubing ID: 10mm Length 10m - 56710

Narva Convoluted Split Tubing ID: 10mm Length 10m - 56710

$30
Fitment Notes:
See More
Narva P Clip 9.5mm ID Plastic 100Pc - 56584

Narva P Clip 9.5mm ID Plastic 100Pc - 56584

$28
Fitment Notes:
See More
VDO Blanking Cover 52mm - 230.038
VDO

VDO Blanking Cover 52mm - 230.038

$26
Fitment Notes:
See More
Narva Relay Connector 4/5 Pin Flat - 68084BL

Narva Relay Connector 4/5 Pin Flat - 68084BL

$25
Fitment Notes:
See More
Showing 1249 - 1287 of 5741 products

2011 Ford Mondeo Headlights: Replacement and Maintenance Guide

The headlights on your 2011 Ford Mondeo are crucial for safe driving, especially during the darker hours or in poor weather conditions. Ensuring these lights are always in top condition is essential. If you're not yet familiar with the maintenance or replacement processes, this guide will help you through it all in an effortless manner.

Firstly, it's important to understand what kind of headlights your 2011 Ford Mondeo uses. The model commonly features halogen bulbs, which offer a great balance between visibility and cost-effectiveness. However, given advances in technology, some may choose to upgrade to HID or LED options for improved brightness and longevity.

If you find your headlights flickering, dimming, or completely going out, it's time to consider replacement. Here's a straightforward approach:

  1. Before starting, switch off your engine and ensure the headlights are turned off. Safety first!
  2. Open the bonnet of your Mondeo and locate the backside of the headlight assembly. The 2011 model often provides easy access without needing to move too many components.
  3. Disconnect the power connector from the bulb by pressing the small release tab and pulling gently. Take care not to force it as this could damage the wiring.
  4. Once disconnected, remove the bulb's retaining clip or holder. The bulb should now be free to carefully remove from the socket. If you encounter resistance, double-check that all retaining mechanisms are fully released.
  5. Install the new bulb by inserting it into the socket while ensuring it sits securely. Reattach the bulb's retaining clip or holder.
  6. Reconnect the power connector, ensuring a tight and secure fit.
  7. Test the new headlight by switching it on while the bonnet is still open, making sure it activates properly without flickering.

Replacing your headlights isn't just about fitting new bulbs when old ones fail. Regular maintenance can dramatically extend the life of your lights. One of the most prevalent issues with headlights is clouding or yellowing of the plastic lens cover. This not only affects the look of your vehicle but also the effectiveness of the light itself.

To maintain clarity of your headlight lenses:

  • Regularly clean the exterior of the lenses using an automotive glass cleaner and a soft cloth. Household chemicals should be avoided as they might damage the plastic.
  • Consider using a headlight restoration kit if your lenses have started to yellow or become cloudy. These kits often come with solutions and sanding tools to buff out the imperfections.
  • Apply a protective sealant after the restoration process to help protect against future oxidation.

It's also a wise move to periodically check your headlights for proper alignment. Misaligned lights can reduce visibility and may even blind oncoming drivers. To check and adjust alignment, a flat surface facing a wall about 7.5 meters away is ideal. Turn on the lights and adjust their height and lateral aim according to your specific vehicle's service manual guidelines.

You should also be aware of New Zealand's regulations regarding vehicle lighting. Ensuring your headlights conform to these can save you from any unwelcome roadside surprises.

Headlight technology advances swiftly, and while the 2011 Ford Mondeo may not come with the latest features, maintaining what you have can make a significant difference in safety and performance. By spending a little time ensuring your headlights are in tip-top shape, you can enjoy a more pleasant and secure driving experience. Whether you're replacing bulbs or reinvigorating the clarity of your lenses, this maintenance will enhance your journeys, giving you both peace of mind and a clear road ahead.