Your Selected Vehicle
Parts for your 2011 Ford Fiesta-Headlights
LED Autolamps 12/24V LED Reverse Lamp Screw Surface Mount Blister Pack - 12WM-2
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Explore 4WD & Adventure
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
LED Autolamps Front End Outline Marker White 12/24Vwith 2P plugs 10cm cable - 58WMB2P
LED Autolamps 12/24V LED Stop/Tail/Indicator Light 284x100x27mm Blister Pack - 282ARRM
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIM
LED Autolamps Twin function rear position with supplementary rear indicator - 97RIMB
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps Twin function front position with supplementary front indicator - 97WIM
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
LED Autolamps Multi Volt LED Licence Plate Lamp With Chrome Base Twin Blister - 30CLM
LED Autolamps 12/24V Stop/Tail Lamp With Reflector 14 LEDs Blister Package - 130RMG
LED Autolamps Twin function side indicator with amber/red side marker - 97ARIMB
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
2011 Ford Fiesta headlights
Headlights are absolutely fitted to the 2011 Ford Fiesta and are central to its road-legal lighting system. This is supported by the Ford Fiesta Owner’s Manual (2011 model year), the Ford WS/WT Fiesta workshop literature, and local standards such as ADR 13/00 (Australia) and NZTA Warrant of Fitness guidance, all of which specify mandatory dipped and main-beam headlamps for safe night and low‑visibility driving.
On this Fiesta, the headlights do the heavy lifting after dark: dipped beam handles everyday driving without dazzling others, while high beam throws light further down the road on unlit stretches. Clear, correctly aimed lamps help the driver spot hazards early, read road signs, and be seen by others in rain, fog, or twilight. Because most 2011 Fiestas use halogen bulbs, light output naturally fades over time, so keeping them fresh is a simple way to restore night-time confidence.
As part of routine servicing, it’s worth giving the headlights a quick once‑over. If one side’s gone, the other likely isn’t far behind—replacing in pairs keeps the beam colour and brightness even. Avoid touching the bulb glass with bare fingers, oil residue can shorten bulb life. If there’s misting inside the lens that doesn’t clear after a drive, check the rear caps and seals for damage. Yellowed or hazy lenses can often be restored with a plastic headlight polish kit, that small effort can bring back lost brightness.
Correct aim matters just as much as brightness. A low beam that’s set too high will dazzle oncoming traffic, too low and the car outruns its light. After any front‑end work—or if the Fiesta’s been loaded differently—have the aim checked with a beam setter to ADR/NZTA guidelines. If a headlight is out completely, don’t forget the basics: check the relevant fuse, verify the connector is snug, and inspect the wiring for corrosion near the lamp housing.
For bulb specification and access steps, the owner’s manual for the 2011 Fiesta is the go‑to. If upgrading to LED or higher‑output bulbs, confirm they’re compliant and correctly focused in the Fiesta’s housing to stay legal for rego or WoF.
- Inspect lenses and operation at every service or 10,000 km.
- Replace bulbs in pairs, carry a spare on longer trips.
- Check seals and aim after any front‑end repair or impact.
Popular questions about 2011 Ford Fiesta headlights
What headlight bulb type does a 2011 Ford Fiesta use?
Bulb type can vary by trim and market. Many 2011 Fiestas use halogen bulbs with separate low and high beams, but the exact spec is listed in the owner’s manual and on the lamp housing. When replacing, match the original type and avoid touching the glass. If considering LED replacements, make sure they’re road‑legal and correctly focused in the factory housing.
How can someone tell if the Fiesta’s headlights need re‑aiming?
Signs include other drivers flashing you, a dark foreground with a bright sky patch, or one beam pattern sitting higher than the other against a wall. After suspension, bumper, or headlight housing work, have the aim checked with a beam setter to meet ADR/NZTA requirements and avoid WoF or rego issues.
How often should headlight bulbs be replaced?
There’s no fixed interval—replace when dim, discoloured, or failed. Halogen bulbs often lose output gradually after a couple of years. Replacing in pairs restores balanced light and colour temperature, and keeping a spare on hand saves hassle on road trips.