Parts for your 2011 Daihatsu Bego-Tail lights

2011 Daihatsu Bego tail-lights — what they do and how to look after them

Technical sources confirm the 2011 Daihatsu Bego is factory-fitted with tail-lights. The Daihatsu J200-series workshop manual (Electrical–Lighting, Rear Combination Lamp) describes the tail/stop/indicator/reverse functions within the rear combination lamp. The Toyota Rush/Terios owner’s manual for the same platform notes that tail-lights illuminate with the light switch in the tail or headlight position. Tail-lights are also mandated by the Australian Design Rules and New Zealand’s Land Transport Rule: Vehicle Lighting 2004 for passenger vehicles, so a 2011 Bego on AU/NZ roads must have working rear position lamps.

On the Bego, the tail-lights are the always-on rear position lamps that light up with the parkers or headlights, helping others see the vehicle in low light, rain, or dust. They share the rear combination lamp with stop, indicator, and reverse lamps, so clear, bright output and an intact lens are essential for safety and compliance.

Servicing is straightforward and worth doing before long trips or WOF/rego checks. Typical maintenance includes cleaning the lens, inspecting for cracks and moisture, and replacing tired globes with the correct wattage. Many Begos use a twin‑filament stop/tail globe (often 21/5 W) for the outer lamp, but trims vary—always confirm against the owner’s manual or the marking on the holder.

• Open the tailgate and remove the small interior access panel.
• Undo the lamp fasteners