Your Selected Vehicle
Parts for your 2011 Audi Q5-Headlights
Narva Sealed Rocker Switch Off/On SPDT 12V Blue Illuminated LED Light Bar Symbol (Contacts Rated 20A @ 12V) - 63145BL
Explore 4WD & Adventure
OEX 3mm Twin Core Automotive Cable, Red / Black, With Black Sheath - 5m Blister Pack (NZ Ref.151) - ACX0806-5BL
Narva Sealed Rocker Switch Momentary On/Off/Momentary On DPDT 12V Blue Illuminated Winch Symbol (Contacts Rated 20A @ 12V Only) - 63148BL
Narva Crimp Terminal Male Blade Red Terminal Entry 6.3 x 0.8mm Heat Shrinkable 20 Pce - 56320BL
Narva Heavy Duty Toggle Switch Momentary On/Off/Momentary On DPDT (Contacts Rated 25A @ 12V) - 60068BL
2011 Audi Q5 Headlights — purpose, care, and when to replace
Based on Audi factory literature for the 2011 Q5 (Typ 8R) — including the Owner’s Manual and parts catalogues used by dealers — this model is fitted with headlamps as standard. Variants include conventional halogen units or Xenon (HID) “Xenon plus” assemblies with LED daytime running lights, so headlights are absolutely relevant on a 2011 Audi Q5.
On this Q5, the headlights do the heavy lifting for safe night and poor-weather driving, projecting a clean beam pattern that meets ADR/ECE road standards while keeping glare down for oncoming traffic. Many Australian and New Zealand–delivered cars feature automatic headlight functions, and HID-equipped models add auto-levelling and LED DRLs for better daytime visibility. Bulb types and connectors vary by trim, so owners should confirm against the vehicle’s handbook or parts ID label.
As part of regular servicing, it pays to give the headlights a once-over. Lenses can haze from UV, bulbs dim with age, and aim can drift with suspension wear or a good thump in a pothole. On HID cars, a failing D3S bulb may colour-shift pink or flicker before it goes out, and the control unit (ballast) or DRL LED strip can also be culprits. If the car has auto-levelling or adaptive cornering lights, some procedures need scan-tool calibration after repairs.
- Replacement pointers: Change bulbs in pairs to keep brightness and colour matched. Don’t touch bulb glass