Parts for your 2010 Toyota Vitz|yaris-Wheel hubs

2010 Toyota Vitz/Yaris Wheel Hubs — Purpose, Service Tips, and Replacement Advice

Wheel hubs are absolutely fitted to the 2010 Toyota Vitz/Yaris (XP90). Toyota’s service literature and parts catalogues for this model list both a “Hub Sub‑Assembly, Front” and a “Hub Sub‑Assembly, Rear Axle,” confirming their use on the 2010 build. Workshop manuals for the XP90 platform describe a sealed bearing/hub arrangement at the rear (bolt-on unit with wheel studs and ABS tone ring) and a hub with a sealed bearing at the front mounted in the steering knuckle. These references make wheel-hubs entirely relevant for servicing and replacement on this vehicle.

On a 2010 Vitz/Yaris, the wheel hub’s job is to provide a solid, true-running flange for the wheel and brake to mount to, while the integrated bearing lets the wheel spin smoothly with minimal friction. The ABS sensor reads off a tone ring at the hub, so hub health also affects braking stability control systems.

There’s no fixed replacement interval