Your Selected Vehicle
Parts for your 2010 Suzuki Sx4-Pedal pads
Explore 4WD & Adventure
2010 Suzuki SX4 pedal pads: purpose, fitment and service advice
Pedal pads are relevant and used on the 2010 Suzuki SX4. Factory documentation and parts listings confirm the SX4 is fitted with replaceable rubber pads on the brake pedal (all models) and on the clutch pedal for manual transmissions. The accelerator is typically a moulded plastic tread without a separate replaceable pad. This is consistent with the Suzuki SX4 service manual guidance to inspect pedal pad wear during routine servicing, and with Suzuki’s electronic parts catalogue showing brake and clutch pedal rubbers as service parts for this model. Regulatory guidance in Australia and New Zealand also expects foot pedals to have an effective non-slip surface.
On this SX4, pedal pads provide sure-footed grip in the wet, help dampen vibration through the foot, and protect the metal pedal face from wear. They’re a small, inexpensive item that makes a big difference to safety and day-to-day driveability, especially in rainy Kiwi conditions or Aussie heat where soles can get slick.
As part of regular servicing, it’s smart to check the brake (and clutch, if manual) pedal pads and replace them if they’re worn, hardened, or loose. Most workshops will inspect them at each service because excessive smoothing or cracking can attract a WOF/roadworthy fail and increase stopping distances if your shoe slips.
- Slick, shiny or glassy pedal surface
- Cracks, chunks missing, or hard/brittle rubber
- Pad lifting at the edges or moving on the pedal face
- Noticeable foot slip in wet shoes
Replacement is straightforward: choose a quality OEM-equivalent brake (and clutch) pedal pad sized for the 2010 SX4, pull off the old rubber, clean the pedal face, and stretch the new pad evenly over the pedal until the lip seats all the way around. Avoid universal clip-on covers that can reduce grip or foul the pedal travel. After fitting, press the pedals firmly to confirm full, unobstructed movement and no pad shift.
Keep pads grippy by washing off mud or road grime with mild soap and water. Skip silicone dressings and oily cleaners