Parts for your 2010 Subaru Tribeca-Wheel hubs

2010 Subaru Tribeca Wheel Hubs

Based on Subaru’s 2010 Tribeca factory service manual (Front/Rear Axle – Hub Unit Bearing) and the Subaru electronic parts catalogue, this model absolutely uses wheel hub assemblies at all four corners. They’re a bolt-in, sealed hub-and-bearing unit with an integrated ABS encoder, designed for the Tribeca’s full-time AWD and stability control systems.

On a 2010 Subaru Tribeca, the wheel hub assembly is the bit that mates the wheel and brake rotor to the knuckle, houses the bearing that lets the wheel spin smoothly, and provides the mounting face for the wheel studs. Up front, it also splines to the driveshaft