Parts for your 2010 Subaru Forester-Headlights

2010 Subaru Forester Headlights

Headlights are absolutely fitted to the 2010 Subaru Forester (SH series). This is confirmed by the Subaru Forester 2010 Owner’s Manual, which details headlight operation and bulb replacement, and the Subaru genuine parts catalogue for the SH model listing headlamp assemblies and halogen bulbs. Compliance with Australian Design Rule ADR 13/00 and the equivalent New Zealand lighting requirements also makes dipped and main-beam headlamps mandatory equipment on this vehicle.

On this Forester, the headlights do the heavy lifting for safe night and low‑visibility driving — making the car visible to others and lighting the way ahead. Most AU/NZ 2010 Foresters run halogen bulbs: typically H11 (12V 55W) for low beam and HB3/9005 (12V 60W) for high beam. Some trims may vary, so it’s smart to check the owner’s manual or the label behind the headlight cap before buying bulbs.

As part of routine servicing, it’s worth giving the headlights a quick once‑over. Make sure both beams fire up evenly, the lenses are clean and clear, and the aim is correct so you’re not dazzling oncoming traffic. Halogen bulbs fade over time, so if one fails or looks dim, replace in pairs to keep light colour and brightness matched. Under the bonnet, access is via a rear dust cap on each headlamp — twist off, unplug the connector, release the bulb spring or clip, swap the bulb, and refit. Avoid touching the glass