Parts for your 2010 Nissan Serena-Pedal pads

2010 Nissan Serena pedal pads

Based on the Nissan Serena C25/C26 Electronic Service Manual (Brake Control – Brake Pedal, Clutch – Pedal) and Nissan FAST electronic parts catalogue, the 2010 Nissan Serena is fitted with a replaceable rubber brake pedal pad, and manual-transmission models also have a separate clutch pedal pad. The accelerator uses an integrated plastic/rubber tread and typically isn’t a separate pad. Inspection guidance in the NZTA Vehicle Inspection Requirements Manual (VIRM) also recognises pedal anti-slip surfaces as a safety item, reinforcing that pedal pads are relevant parts on this model.

On a 2010 Serena, pedal pads do a simple but vital job: they provide a grippy, anti-slip surface for the driver’s shoe, especially in the wet. Over time, the rubber hardens, smooths off, or cracks, which reduces grip and can lead to a failed WoF or safety inspection. For CVT/auto Serenas, it’s one brake pedal pad, for manual variants, there’s a brake and a clutch pad. The accelerator is a one-piece pedal and usually isn’t serviced as a separate pad.

As part of routine servicing, it’s wise to check the pedal pads every 10,000–15,000 km or at each service interval. Look for these signs:

• Shiny, smooth, or worn-down tread pattern
• Cracks, splits, or hardened rubber
• Pad lifting at the edges or not sitting square on the metal pedal

Replacement is straightforward and inexpensive. The old pad is levered off, the pedal face is cleaned, and the new pad is worked on from one edge and stretched evenly around the pedal plate. Using a genuine Nissan part or a quality aftermarket pad that matches the Serena’s pedal shape ensures correct fit and grip. A dab of mild soapy water can help the new pad slide on, but avoid oils or silicone sprays that can leave the surface slippery.

Drivers who commute in wet or muddy conditions, or wear hard-soled footwear, may notice faster wear, a quick monthly glance keeps surprises at bay. Clean pads with mild soap and water—no solvents—so the rubber doesn’t dry out. If the vehicle goes for a WoF or safety check, expect the inspector to fail pads that are smooth or missing, so swapping them pre-emptively can save a recheck.

Bottom line: fresh pedal pads restore the Serena’s sure-footed feel underfoot and help keep inspections hassle-free.

Popular questions about 2010 Nissan Serena pedal pads

Do all 2010 Serena models have removable pedal pads?
Yes, the brake pedal has a replaceable rubber pad on all variants. Manual-transmission Serenas also have a separate clutch pedal pad. The accelerator pedal is typically a one-piece unit and isn’t serviced as a separate pad.

How often should pedal pads be replaced?
There’s no fixed time limit. Replace them when the tread is worn smooth, the rubber is cracked or hard, or if the pad won’t sit securely. A quick check at each service or WoF is usually enough to catch wear early.

Can a universal pedal pad be used?
Some universal pads fit, but a Serena-specific pad or a genuine Nissan item is the safer bet for proper fit and consistent grip. Always match by vehicle model, year, and transmission type.