Parts for your 2010 Nissan Serena-Brake pads

2010 Nissan Serena Brake Pads

Based on the Nissan Serena C25/C26 model service manual (Brake, BR section) and Nissan’s FAST electronic parts catalogue for 2010 production, the Serena is fitted with disc brakes and brake pads on the front axle, and depending on trim/market, either disc-and-pad or drum brakes at the rear. So brake pads are absolutely relevant for the 2010 Nissan Serena.

On this people-mover, the front brake pads do the heavy lifting, converting speed into heat through friction against the rotors. Quality pads help keep stopping distances short, pedal feel consistent, and ABS performance predictable—especially when the Serena is loaded with family, mates, or gear.

For routine servicing, pads should be inspected at regular intervals, typically every 10,000–15,000 kilometres or at each service. Technicians look for remaining friction thickness, even wear, glazing, cracks, and any contamination. Once the friction material gets down to around 2–3 mm, replacement is due. Many variants also have wear indicators that squeal when the pads are near the end of their life—handy before metal meets rotor.

When replacing, it’s best practice to fit pads as an axle set (both front wheels together, and both rears if the vehicle has rear discs). The rotors should be measured for thickness and checked for run-out and surface condition