Parts for your 2010 Nissan Serena-Air filter

2010 Nissan Serena air filter — what it does and how to look after it

Yes, the 2010 Nissan Serena is fitted with an engine air filter. Technical references that confirm this include the Nissan Serena Factory Service Manual for C25/C26 models (Engine Control/Intake sections noting the “air cleaner filter element”), the 2010 Owner’s Manual maintenance schedule, and the Nissan Electronic Parts Catalogue (group 16546 – Air Cleaner Filter). It’s a standard panel-type element housed in the air cleaner box under the bonnet. Note: there’s also a separate cabin/pollen filter for the HVAC system, which isn’t the same part.

The engine air filter’s job is simple but vital: it screens out dust, sand, and debris before air reaches the mass air flow sensor and cylinders. Keeping it healthy helps the Serena’s MR-series petrol engine breathe properly, keeps fuel economy tidy, and reduces emissions. A clean filter also protects the MAF sensor from contamination and avoids premature engine wear. On Aussie and Kiwi roads—especially with unsealed tracks, coastal air, and seasonal dust—this part quietly does a lot of heavy lifting.

Service-wise, a sensible rule for the Serena is to inspect the engine air filter every 15,000 km or 12 months, and replace it about every 30,000–40,000 km (or 2 years). In dusty or rural conditions, bring that forward—checking at 10,000–15,000 km and replacing sooner if it looks clogged. Nissan’s own guidance in period manuals supports inspection at regular service intervals and replacement according to use and environment.

• Common signs it’s due: dull acceleration, rough idle, increased fuel use, dark or heavily dusty media, or a whistling intake note.
• Good practice: choose a quality, vehicle-specific element with the correct sealing gasket