Parts for your 2010 Nissan Pulsar-Heater hose

2010 Nissan Pulsar heater hose — what it does and when to replace it

Yes, the 2010 Nissan Pulsar uses heater hoses. While the Pulsar badge took a break in parts of Australia and New Zealand around 2010, the mechanically equivalent C11 Tiida (often treated as the Pulsar in catalogs) is documented with heater inlet and outlet hoses running between the engine and the heater core. This is shown in Nissan’s factory service manual (C11 HA—Heater & Air Conditioning) and the Nissan FAST electronic parts catalogue, and it’s backed up by Gates and Dayco AU/NZ application listings that specify replacement heater hoses for these models.

The heater hose on a 2010 Nissan Pulsar carries hot engine coolant to and from the heater core under the dash, letting the cabin heater do its thing while also helping stabilise engine temperatures. On these Nissans there’s typically no heater tap