Your Selected Vehicle
Parts for your 2010 Mitsubishi Lancer-Batteries
Explore 4WD & Adventure
Narva Automotive/Marine Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61044BL
Narva Rotary Battery Master / Isolator Switch With Removeable Keyed Knob (Contacts Rated 100A 12V) - 61036
Narva 4 Position Rotary Battery Master / Isolation Switch (Contacts Rated 300A @ 12V) - 61084BL
Narva Heavy Duty Battery Master / Isolation Switch with Removable Key (Contacts Rated 250A @ 12V) - 61050
Narva Battery Master / Isolation Switch Lever Type With Lockout (Contacts Rated 250A @ 12V) - 61064
2010 Mitsubishi Lancer — Batteries
According to the 2010 Mitsubishi Lancer owner’s manual, Mitsubishi workshop documentation, and major Australian/NZ fitment catalogues (Century/Yuasa, Supercharge, Bosch), this model is factory-fitted with a 12‑volt lead‑acid starting battery. It’s absolutely relevant to the Lancer’s operation, providing the cranking power to start the engine and stabilising voltage for the ECU, ABS, SRS, lighting, and accessories.
The battery’s job is straightforward but critical: deliver a high burst of current to the starter, then act as a buffer while the alternator manages the electrical system. Even with the engine off, it keeps memory for the radio, clock and control modules. For most 2010 Lancers, a sealed maintenance‑free (SMF) flooded lead‑acid unit is typical
