Your Selected Vehicle
Parts for your 2010 Mazda Cx-7-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Understanding Tail-Lights on the 2010 Mazda CX-7: Purpose, Maintenance, and Replacement Tips
The 2010 Mazda CX-7 comes equipped with tail-lights, an essential safety component for any vehicle. Tail-lights play a crucial role not only in enhancing the visibility of the car during night driving but also in communicating a driver's intentions to other road users. These lights are designed to illuminate whenever the headlights or parking lights are switched on, ensuring the vehicle is clearly visible from behind. This is especially important in low light conditions, bad weather, or any situation where visibility is compromised.
Tail-lights on the 2010 Mazda CX-7 are mounted at the rear corners of the vehicle. They typically glow with a dim red light when activated, signalling the presence of the car to drivers behind. When the brakes are applied, the tail-lights become noticeably brighter, alerting following traffic that the vehicle is slowing down or stopping. Some tail-lights also integrate turn signal indicators, which flash amber or red to indicate a change of direction.
Aside from the functional benefits for safety and communication on the road, tail-lights also contribute to the overall aesthetic of the Mazda CX-7. The design of these lights complements the sporty and sleek look of the SUV, reinforcing its modern and dynamic styling.
Proper maintenance and timely replacement of tail-lights are essential for keeping the 2010 Mazda CX-7 roadworthy and compliant with Australian vehicle regulations. Here are some important aspects to consider when looking after tail-lights on this vehicle:
- Regular Inspection: It's a good idea to check the tail-lights regularly, especially before heading out on long trips or during routine vehicle servicing. Look out for any cracks or damage to the lens, as well as ensuring the lights illuminate correctly when switched on.
- Cleaning: Dirt, grime, and road salt can accumulate on the tail-light lenses and reduce their effectiveness. Using a soft cloth and a mild cleaner to wipe down the lenses can help maintain maximum visibility.
- Bulb Replacement: If either of the tail-light bulbs burns out, it should be replaced promptly. The 2010 Mazda CX-7 typically uses standard brake and tail-light bulbs which are widely available from automotive stores. When replacing bulbs, make sure to refer to the owner's manual for the correct bulb type and installation procedure.
- Checking Electrical Connections: Faulty wiring or loose connections can cause tail-lights to malfunction. During servicing, it's worth having a mechanic inspect the wiring harness and connectors for any signs of wear or corrosion.
- Upgrading Options: Some Mazda CX-7 owners choose to upgrade their tail-lights to LED versions for better brightness and longevity. LED tail-lights consume less power and can last significantly longer than traditional bulbs, though it's important to ensure that any aftermarket replacements comply with Australian road laws.
When replacing tail-lights on the 2010 Mazda CX-7, a few handy tips can make the process smoother. Firstly, always disconnect the vehicle's battery before starting to avoid any electrical shorts or shocks. Tail-lights are usually secured with screws or clips accessible from the inside of the rear hatch or trunk area. Carefully remove any trim panels or covers to expose the bulbs.
Handling bulbs with clean hands or gloves will prevent oils from skin contaminating the glass, which can cause premature failure. If unsure about the replacement procedure, consulting the Mazda CX-7 service manual or seeking assistance from a qualified mechanic is recommended to ensure everything fits and functions as it should.
Maintaining the tail-lights isn't just about road safety, it's also about avoiding fines. Australian vehicle regulations require all lights to be operational while driving after dark or in poor visibility, so keeping tail-lights in top condition helps avoid unnecessary legal troubles.
Driving a 2010 Mazda CX-7 with fully functional tail-lights not only keeps you safe but also shows consideration for other drivers on the road. It's a simple part of car ownership, but one that undoubtedly deserves attention as part of regular vehicle care.