Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Show More Show Less

Price

Parts for your 2009 Toyota Crown-Radiator

Sort by
Repco Radiator Fin Straightener & Cleaner - RST18

Repco Radiator Fin Straightener & Cleaner - RST18

$20
Fitment Notes:
See More
Tee-Kay Head Chek - HEADCHEK

Tee-Kay Head Chek - HEADCHEK

$105
Fitment Notes:
See More
Repco Radiator Cooling System Kit - RTT1019

Repco Radiator Cooling System Kit - RTT1019

$906
Fitment Notes:
See More
Repco Radiator Pressure Tester Kit - RTT1017

Repco Radiator Pressure Tester Kit - RTT1017

$617
Fitment Notes:
See More
T&E Tools Radiator Back Flusher

T&E Tools Radiator Back Flusher

$92
Fitment Notes:
See More
Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

Tee-Kay Head Chek Fluid 16oz. - TKFLUID500

$27
Fitment Notes:
See More
Toledo Radiator Back Flusher - 308237

Toledo Radiator Back Flusher - 308237

$116
Fitment Notes:
See More

Explore 4WD & Adventure

Toledo Radiator Fin Straightener - 308240

Toledo Radiator Fin Straightener - 308240

$22
Fitment Notes:
See More
T&E Tools Radiator Fin Straightener

T&E Tools Radiator Fin Straightener

$43
Fitment Notes:
See More
Gates Hose Cutter up to 3in ID - 91143

Gates Hose Cutter up to 3in ID - 91143

$213
Fitment Notes:
See More
Toledo Coolant Filler Funnel Set - 305092

Toledo Coolant Filler Funnel Set - 305092

$224
Fitment Notes:
See More
Repco Cooling System Pressure Test Kit - RST194

Repco Cooling System Pressure Test Kit - RST194

$368
Fitment Notes:
See More
Repco 3 Pc Hose Pinching Pliers Set - RST234

Repco 3 Pc Hose Pinching Pliers Set - RST234

$44
Fitment Notes:
See More
T&E Tools Multi-Directional Hose Clamp Pliers

T&E Tools Multi-Directional Hose Clamp Pliers

$61
Fitment Notes:
See More
Toledo Powerbar Impact Wrench - 301337

Toledo Powerbar Impact Wrench - 301337

$208
Fitment Notes:
See More
Viper Brite Coil Cleaner 3.78L - RT300G

Viper Brite Coil Cleaner 3.78L - RT300G

$337
Fitment Notes:
See More
Toledo Cooling System Tester Truck - 308380

Toledo Cooling System Tester Truck - 308380

$787
Fitment Notes:
See More
T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

T&E Tools Hose Pinch-Off Pliers - 250mm - 4256

$94
Fitment Notes:
See More
T&E Tools Universal Automotive Thermometer

T&E Tools Universal Automotive Thermometer

$31
Fitment Notes:
See More
Showing 1 - 20 of 20 products

2009 Toyota Crown radiator — what it does and how to look after it

Based on Toyota’s Repair Manual for the S200-series Crown (GRS200/201, GWS204 Hybrid, URS206 Majesta), the Toyota Electronic Parts Catalogue, and DENSO original equipment listings, the 2009 Toyota Crown is fitted with a conventional engine cooling radiator. It’s a core part of the cooling system on the V6, V8 and hybrid variants, so it’s absolutely relevant to servicing and reliability.

The radiator’s job is simple but crucial: shift heat out of the engine coolant so the motor stays in its sweet spot, even crawling through city traffic on a stinking hot arvo. Coolant flows through the radiator’s core, air passes through the fins, and electric fans kick in as needed. On many auto models, the radiator tank also houses a transmission fluid cooler, keeping shifts crisp and protecting the gearbox on long Kiwi and Aussie climbs.

For day-to-day care of a 2009 Toyota Crown radiator, the playbook’s pretty straightforward. Toyota specifies Super Long Life Coolant (pink). With Toyota SLLC the typical schedule is a long initial service interval, then periodic changes, always follow the under-bonnet label and the factory manual. Fresh, correct coolant prevents corrosion, cavitation and scale that can choke the core.

  • Pop the bonnet and check coolant level in the reservoir when the engine’s cold.
  • Scan for white or pink crust around hose joins, the cap and radiator tanks.
  • Inspect fins for bugs and debris, rinse gently from the back, no high-pressure blast.
  • Confirm the cap seals well and is the correct pressure rating for your Crown.
  • Watch temp behaviour: creeping temps at idle or spikes on hills can hint at a clog.

When it’s time for replacement—usually due to leaks, cracked plastic tanks, crushed fins or internal blockage—go for a quality unit that matches the OE core size and fittings. Replace the cap, upper and lower hoses, and clamps while you’re there. If your Crown runs an auto, check whether the new radiator includes the integrated trans cooler and reconnect lines with fresh sealing washers. A proper coolant flush, a 50/50 premix of Toyota SLLC and demineralised water (if not buying premix), careful bleeding with the heater on hot, and a good road test will keep the Crown running cool without dramas.

Hybrids still use a conventional engine radiator, and they may have separate cooling loops for the hybrid system—so stick closely to the model-specific procedures in the Toyota manual.

Popular questions about the 2009 Toyota Crown radiator

What coolant should go in a 2009 Toyota Crown, and how often is it changed?

Toyota specifies Super Long Life Coolant (pink). It’s formulated to protect alloy components and the water pump while resisting scale and corrosion. Always match what’s on the filler cap or under-bonnet labels and the factory manual for your exact engine.

Service intervals for Toyota SLLC are typically long initially, then periodic thereafter. Many S200 Crowns follow an extended first change, then shorter subsequent intervals. Harsh conditions—lots of idling, heavy towing, or hot climates—justify more frequent inspections and earlier changes.

What are the signs the Crown’s radiator needs replacement rather than just a flush?

Look for persistent coolant loss, crusty pink/white deposits on the tanks, hairline cracks in the plastic end tanks, or oily residue in the coolant on auto models with an in‑tank trans cooler. Overheating at idle that improves on the open road can also point to a clogged core.

If fins are badly corroded or flattened, or there’s internal sludge that returns soon after a flush, replacement is the sensible call. Pair it with a new cap, hoses and thermostat to reset the whole cooling system.

Is it safe to drive a 2009 Crown with a small radiator leak?

Not recommended. Even a slow leak can become a geyser once pressure and temps rise, risking head gasket damage. If driving is unavoidable, keep trips short, carry water, set the heater to hot to shed extra heat, and watch the gauge like a hawk.

The smarter move is a tow and a proper repair. A new radiator and fresh coolant are far cheaper than an overheated engine or a contaminated transmission on autos with integrated coolers.