Your Selected Vehicle
Parts for your 2009 Suzuki Sx4-Tail lights
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12V 82 Series Stop/Tail/Indicator/Reverse Lamp Black Bracket - 82BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
LED Autolamps Stop/Tail Indicator With 18 Square LEDs Multi Volt Blister - 35ARM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse With Reflectors And 500mm LP Cable - SO283ARWM2LR12
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Understanding and Maintaining Tail Lights on the 2009 Suzuki SX4
The 2009 Suzuki SX4, like most modern vehicles, is equipped with tail lights as an essential safety feature. Tail lights are absolutely relevant and used on this model to ensure the vehicle is visible to others on the road, especially during low light conditions such as night-time driving, bad weather, or heavy traffic. These lights are mounted at the rear of the vehicle and illuminate when the headlights are turned on, signalling the presence of the car to drivers behind.
Tail lights perform a crucial role in vehicle safety by preventing rear-end collisions. When the driver applies the brakes, the tail lights brighten to alert other motorists that the vehicle is slowing down or stopping. They also include turn signal lights to indicate directional changes, helping to communicate driving intentions and promoting safer road sharing. Without properly functioning tail lights, a driver risks not only a fine under road safety regulations, but also increased chances of accidents.
For owners of the 2009 Suzuki SX4, keeping tail lights in good working order should be an important part of routine vehicle maintenance. Given the Australian environment - with its mix of heat, dust, and occasional rain - tail lights can suffer from wear and tear, lens cloudiness, or bulb failure over time. Addressing these issues promptly is key to maintaining the safety and functionality of the vehicle.
When it comes to tail light replacement or maintenance, there are several tips and considerations specific to the 2009 Suzuki SX4 that might help keep the tail lights shining bright:
- Regularly check the tail lights for any signs of damage such as cracked lenses or moisture inside the housing. This can cause the light output to be less effective and potentially create electrical issues.
- Replace burnt-out bulbs promptly. The SX4 typically uses standard 21W tail light bulbs that are widely available and easy to install. Failing bulbs can be detected by simply turning on the headlights and inspecting the rear of the vehicle or by asking a friend for help while you apply the brakes.
- Clean the tail light lenses regularly to remove dirt, grime, and haze. A quick wipe with a soft cloth and a mild cleaning solution improves light clarity and enhances visibility.
- If there is condensation under the lens, it's important to diagnose the source of the leak. Sometimes, worn seals or minor cracks in the housing allow moisture in, which can reduce bulb life and corrode electrical contacts.
- When servicing the vehicle, include a functional check of all lighting systems, especially the tail lights. This ensures compliance with road safety standards and prevents any inconveniences during vehicle inspections or roadside checks.
- If replacing a tail light assembly due to damage or ageing, look for genuine Suzuki parts or high-quality aftermarket options that match the original specifications for fit and function. This guarantees compatibility and lasts longer under Australian driving conditions.
For those doing it themselves, changing a tail light bulb on the 2009 SX4 is generally straightforward. It often involves accessing the rear light cluster from inside the boot, unscrewing or unclipping the light assembly, replacing the bulb, and then securing everything back in place. Still, always consult the vehicle's owner manual for specific details on the bulb types and the correct procedures.
In terms of safety, tail lights are non-negotiable. Driving without properly functioning tail lights severely compromises visibility to other road users, increasing the guesswork on the road. It's also worth noting that tail lights are a legal requirement across Australia, so keeping them operational avoids potential fines and contributes to safer driving for everyone.
Overall, tail lights on the 2009 Suzuki SX4 are an indispensable component for safe driving. With a bit of regular attention - like cleaning, bulb replacement, and damage checks - these lights can keep performing well for many years. So, whether it's during a service check or a quick glance while parking the car, giving the tail lights a moment of attention pays off in safety and peace of mind.