Your Selected Vehicle
Parts for your 2009 Suzuki Splash-Headlights
LED Autolamps 385 Series Rear Combination Lamp RHS with 7 core plug - 385ARWMRCSB
LED Autolamps Multi Volt Rear Combination LED Lamp With Grey Housing And Base - 275GARWMB
Explore 4WD & Adventure
LED Autolamps 12/24V Round Indicator Lamp With Clear Lens 130mm Diameter Recessed Mount - 102ACM
LED Autolamps 24V Front Indicator And Park Light Chrome Bezel Blister Pack - 285CAW24
LED Autolamps Multi Volt Rear Indicator Lamp With 8 Square LEDs Blister Pack With Black Base - 135AM
LED Autolamps 12V Blue Courtesy Lamp Super Small Design Twin Blister Pack - 16B12-2
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMCSB
LED Autolamps Multi Fit Steel Bracket To Suit 280/282/275/80/283/284 Triple Combination Lamps - MFBKT
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
2009 Suzuki Splash headlights
Headlights are absolutely relevant and factory‑fitted on the 2009 Suzuki Splash. This is supported by the Suzuki Splash owner’s manual and genuine parts catalogues for the Splash/Agila platform, as well as roadworthiness standards that require operational headlamps (e.g., Australia’s ADR 13/00 and 46/00, New Zealand’s NZTA VIRM – Lighting). So, if the Splash is on the road, it’s designed to run with working headlights.
On a 2009 Suzuki Splash, the headlights do the heavy lifting after dark and in poor weather: they help the driver see clearly and make the small hatch highly visible to others. They’re built around halogen technology in most markets, chosen for reliable output and easy servicing. The beam pattern is designed to light the lane without throwing glare into oncoming traffic, which keeps night drives more relaxed and within legal limits.
As part of routine servicing, it’s smart to give the Splash’s headlights a quick check. Bulbs dim with age, so if one fails, replacing them in pairs keeps the colour and brightness matched. Always confirm the correct bulb specification in the owner’s manual and on the lamp cap, and avoid touching the glass with bare fingers—skin oils can shorten bulb life. If there’s heavy condensation inside the lens, the rear cover or seal might need attention. Light misting that clears after a drive is usually normal.
- Inspect operation on low and high beam every few weeks, especially before long kilometres.
- Clean lenses with a pH‑neutral car wash, if they’re cloudy, a headlight restoration kit can bring back clarity.
- Check fuses and earths if a new bulb doesn’t light—don’t assume the replacement is faulty.
- Have the beam aim checked after bulb changes, suspension work, or when carrying heavy loads, correct aim prevents glare and improves reach.
Thinking about LED upgrades? Only use components that comply with local rules. In Australia and New Zealand, replacement light sources must meet the lamp’s approval requirements, fitting non‑approved LEDs into halogen housings can fail a WOF/roadworthy and create unsafe glare. When in doubt, stick with quality halogen bulbs from a reputable brand, or have an auto sparky assess a compliant upgrade.
Popular questions about 2009 Suzuki Splash headlights
What headlight bulbs does a 2009 Suzuki Splash use?
Most 2009 Splash models use halogen bulbs. The exact type can vary by market, so check the owner’s manual and the markings on the rear of the headlamp for the correct specification. When replacing, it’s best to change both sides together so brightness and colour match.
How do you adjust the headlight aim on a Splash?
There are adjusters on the back of each lamp to set vertical and horizontal aim. Park on level ground facing a wall, measure the beam height, and tweak carefully—small turns make big differences. If unsure, ask a workshop to align them to ADR/NZTA guidelines to avoid glare and pass WOF/roadworthy checks.
Are LED headlight conversions legal on this model?
Only if the entire lamp and light source combination meets Australian Design Rules or NZTA requirements. Many drop‑in LEDs for halogen housings aren’t approved and may fail inspection. Choose compliant components or stick with quality halogens.