Your Selected Vehicle
Parts for your 2009 Suzuki Splash-Headlights
Narva Dual Pole Battery Master / Isolation Switch Lever Type With Lockout (Contacts Rated 250A @ 12V) - 61066
Explore 4WD & Adventure
Narva Push Button Starter Switch On/Off Momentary SPST Blue LED (Contacts Rated 50A @ 12V) - 60097BL
Narva Sealed Rocker Switch Off/On SPDT 12V/24V Blue LED Illuminated Air Compressor Symbol (Contacts Rated 20A @ 12V) - 63228BL
Narva Sealed Rocker Switch Off/On SPDT 12V Blue Illuminated Compressor Symbol (Contacts Rated 20A @ 12V) - 63140BL
Narva 6 Way Rocker Switch Panel Off/On SPST Red LED With Fuse Protection (Contacts Rated 20A 12V) - 63193
Narva Sealed Rocker Switch Off/On 12V/24V Blue LED Illuminated Winch Power Symbol (Contacts Rated 20A @ 12V) - 63236BL
Narva Nissan Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Driving Lights Symbol (Contacts Rated 3A @ 12V) - 63376BL
Narva OE Style Sealed Push Switch Off/On SPDT 12V Blue LED Illuminated Beacon Symbol (Contacts Rated 3A 12V) - 63310BL
Drivetech 4x4 Rocker Roof Lights Switch On/Off SPST 12 or 24V Blue Illumination (Contacts Rated 20A @ 12V) - DT-11010
2009 Suzuki Splash headlights
Headlights are absolutely relevant and factory‑fitted on the 2009 Suzuki Splash. This is supported by the Suzuki Splash owner’s manual and genuine parts catalogues for the Splash/Agila platform, as well as roadworthiness standards that require operational headlamps (e.g., Australia’s ADR 13/00 and 46/00, New Zealand’s NZTA VIRM – Lighting). So, if the Splash is on the road, it’s designed to run with working headlights.
On a 2009 Suzuki Splash, the headlights do the heavy lifting after dark and in poor weather: they help the driver see clearly and make the small hatch highly visible to others. They’re built around halogen technology in most markets, chosen for reliable output and easy servicing. The beam pattern is designed to light the lane without throwing glare into oncoming traffic, which keeps night drives more relaxed and within legal limits.
As part of routine servicing, it’s smart to give the Splash’s headlights a quick check. Bulbs dim with age, so if one fails, replacing them in pairs keeps the colour and brightness matched. Always confirm the correct bulb specification in the owner’s manual and on the lamp cap, and avoid touching the glass with bare fingers—skin oils can shorten bulb life. If there’s heavy condensation inside the lens, the rear cover or seal might need attention. Light misting that clears after a drive is usually normal.
- Inspect operation on low and high beam every few weeks, especially before long kilometres.
- Clean lenses with a pH‑neutral car wash, if they’re cloudy, a headlight restoration kit can bring back clarity.
- Check fuses and earths if a new bulb doesn’t light—don’t assume the replacement is faulty.
- Have the beam aim checked after bulb changes, suspension work, or when carrying heavy loads, correct aim prevents glare and improves reach.
Thinking about LED upgrades? Only use components that comply with local rules. In Australia and New Zealand, replacement light sources must meet the lamp’s approval requirements, fitting non‑approved LEDs into halogen housings can fail a WOF/roadworthy and create unsafe glare. When in doubt, stick with quality halogen bulbs from a reputable brand, or have an auto sparky assess a compliant upgrade.
Popular questions about 2009 Suzuki Splash headlights
What headlight bulbs does a 2009 Suzuki Splash use?
Most 2009 Splash models use halogen bulbs. The exact type can vary by market, so check the owner’s manual and the markings on the rear of the headlamp for the correct specification. When replacing, it’s best to change both sides together so brightness and colour match.
How do you adjust the headlight aim on a Splash?
There are adjusters on the back of each lamp to set vertical and horizontal aim. Park on level ground facing a wall, measure the beam height, and tweak carefully—small turns make big differences. If unsure, ask a workshop to align them to ADR/NZTA guidelines to avoid glare and pass WOF/roadworthy checks.
Are LED headlight conversions legal on this model?
Only if the entire lamp and light source combination meets Australian Design Rules or NZTA requirements. Many drop‑in LEDs for halogen housings aren’t approved and may fail inspection. Choose compliant components or stick with quality halogens.