Parts for your 2009 Holden Colorado-Wheel hubs

2009 Holden Colorado Wheel Hubs — Purpose, Maintenance and Replacement

Wheel hubs are absolutely fitted to the 2009 Holden Colorado. Technical references including the Holden Colorado RC Series workshop manual (front suspension and axle sections), GM’s electronic parts catalogue for the 2009 RC, and equivalent Isuzu D‑Max (2008–2011) service literature confirm the front end uses a sealed hub-and-bearing assembly with ABS tone ring, while the rear runs a live axle where the hub function is integrated at the axle flange with pressed bearings and seals. Aftermarket catalogues from OE suppliers (e.g., ACDelco, Timken, NSK) list direct-replacement hub assemblies and bearings for this model, further validating fitment.

On this ute, the front wheel hub does the heavy lifting: it supports the vehicle weight, locates the wheel and brake rotor, houses the wheel bearing, and provides the mounting face for the wheel studs. In 4x4 variants with shift-on-the-fly, the front hubs are fixed (no manual free-wheeling hubs from factory), with engagement handled internally by the front axle disconnect. The rear uses pressed bearings on the axle shaft