Parts for your 2009 Holden Barina-Drive belt

2009 Holden Barina drive belt — what it does and when to replace it

The 2009 Holden Barina is fitted with an auxiliary drive belt (often called a serpentine or accessory belt). Technical sources that confirm this include the Holden/GM service information for the Barina TK (Daewoo T250 platform), which details the belt routing and spring-loaded tensioner, and Australian application catalogues from Gates and Dayco that list the correct auxiliary belt for 2009 Barina 1.6-litre models. These sources make it clear the Barina uses a drive belt to run front-end accessories.

On this model, the drive belt spins the alternator, power steering pump and air-conditioning compressor. The engine’s water pump is driven by the timing belt, not the drive belt, which is worth knowing if diagnosing cooling issues. The drive belt’s job is simple but critical: keep the electrics charging, the steering light, and the cabin cool.

For routine servicing in Aussie and Kiwi conditions, the belt should be inspected at every service and typically replaced about every 80,000–100,000 kilometres or 5–6 years, sooner if there’s visible wear or noise. Heat, dust, and stop–start commuting can shorten belt life. Also check the automatic tensioner and idler pulleys