Your Selected Vehicle
Parts for your 2009 Ford Territory-Tail lights
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator Lamp Blister Pack - 280ARRM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reflector With Licence Plate Lamp - 99ARLM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamps With Reflector Twin Blister - 101BAR2
Fitment Notes:
Explore 4WD & Adventure
Narva Model 72 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 12V/24V Maxilamp 5 Lamp Combination Stop/Tail/Indicator/Reverse/Reflector - MAXILAMPC5XRW
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator 380 Series Strip Lamps In Double Black Bracket - 380BAR12
Fitment Notes:
Narva Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
Hella 12/24V LED Stop/Tail/Indicator/Number Plate Lamp with 6M Lead - 23956MBULK
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflector 150x80x22M - 151BAR
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
Maintaining and Replacing Tail Lights on Your 2009 Ford Territory
The tail lights on your 2009 Ford Territory play a crucial role in road safety, ensuring that your vehicle is visible to others from the rear, especially in low-light conditions or adverse weather. Keeping them in good working order is essential for both safety and legal compliance. Here's a straightforward guide to maintaining and replacing your tail lights, which can be a cost-effective aspect of routine vehicle servicing.
Why Tail Lights Matter
- Improved Safety: Tail lights inform drivers behind you about your vehicle's presence and intention, whether you're stopping, turning or reversing.
- Legal Compliance: Driving without functioning tail lights can lead to fines and other legal issues.
Signs Your Tail Lights Need Attention
- Dim or non-illuminating lights
- Cracked or damaged lenses
- Moisture or condensation inside the light housing
- Warning indicators on your dashboard
Steps to Replace Your Tail Lights
- Locate the Tail Light Assembly: Open the boot and locate the screws or fasteners securing the tail light assembly.
- Remove the Tail Light: Carefully unscrew the assembly. Depending on your Territory's design, you might need to remove part of the interior lining to gain full access.
- Disconnect the Wiring: Before removing the old tail light, disconnect the wiring harness connected to the back of the unit. Ensure your vehicle is turned off to prevent any electrical issues.
- Install the New Tail Light: Connect the new tail light to the wiring harness and securely fasten it into the assembly position.
- Test the Lights: Before wrapping up, start your vehicle and check the functionality of the newly installed tail lights to ensure everything is working smoothly.
Maintenance Tips
- Regularly inspect your tail lights for any signs of damage or wear.
- Clean the lenses routinely to remove dirt or grime that can dull the lights' brightness.
- Consider upgrading to LED bulbs for a longer-lasting, more energy-efficient lighting solution.
Tending to your tail lights is a straightforward task that can vastly enhance your driving safety. By staying proactive about their maintenance, you can help ensure your vehicle remains visible and compliant, sparing yourself from potential headaches down the road.