Your Selected Vehicle
Parts for your 2008 Toyota Bb-Headlights
Explore 4WD & Adventure
2008 Toyota bB Headlights — purpose, care, and when to replace
Headlights are absolutely fitted and relevant to the 2008 Toyota bB. This is supported by Toyota technical literature for the bB (QNC20/21 series, circa 2007–2010) including the Owner’s Manual and Toyota’s Electronic Parts Catalogue, as well as lighting requirements under Australian Design Rules (ADR 13/00) and ECE R112. The 2008 bB uses factory halogen headlamps in a multi-reflector or projector-style housing depending on trim and market.
On this model, the headlights do the heavy lifting for safe night driving: low beam handles close‑to‑car visibility without dazzling oncoming traffic, while high beam reaches down the road on open highways. The assemblies also protect the bulbs, manage the beam pattern, and include adjusters, vents and seals to keep things clear and aligned.
As part of regular servicing, it’s smart to give the bB’s headlights a quick once‑over every few months or 10,000 kilometres. Keep the lenses clean, check for yellowing, haze or stone chips, and make sure the beam aim is right so visibility is spot on. Bulbs dim with age, so replacing them in pairs keeps left and right output balanced. When swapping bulbs, avoid touching the glass with bare fingers—use gloves to prevent hot spots that shorten bulb life.
- Access is usually from behind the headlamp under the bonnet: unplug the connector, release the spring clip or twist-lock, swap the bulb, then refit the dust cap securely.
- If the lens is cloudy, a quality headlight restoration kit can bring back clarity
