Your Selected Vehicle
Parts for your 2008 Suzuki Splash-Headlights
LED Autolamps Red LED Stop/Tail Lamp Insert For J3 Series Blister Pack - J3RM
LED Autolamps 12V Round Indicator Lamp With Amber Lens Recessed Mount 130mm Diameter - 102A
Explore 4WD & Adventure
LED Autolamps Twin function front position with supplementary front indicator - 97CWIM
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
LED Autolamps Twin function front position with supplementary front indicator - 97WIMB
LED Autolamps 12/24V Reverse Light 200x50mm With 25 LEDs Black Bracket - 200BWM
LED Autolamps 12/24V Rear Indicator Lamp Red Reflector Blister Pack - 460AM
LED Autolamps Twin Function Stalk Side Indicator With Red/Amber Side Marker LHS Multivolt - 805ARIML
LED Autolamps Rear End Outline LED Marker Red 12/24v Red Lens 16cm Cable Blister Pack - 42RM
LED Autolamps Twin function front position with supplementary front indicator - 97CWIMB
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
LED Autolamps Multi Volt Indicator Lamp With Clear Lens And Chrome Reflector Blister Pack - 131CAM
LED Autolamps 12/24V Rear Indicator Light With Amber Lens Blister Pack - 113AMG
LED Autolamps Twin function rear position with supplementary rear indicator - 97CRIMB
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
LED Autolamps Multi Volt Rear Combination LED Lamp With Grey Housing And Base - 275GARWMB
2008 Suzuki Splash headlights — what they do and how to look after them
Headlights are absolutely fitted to the 2008 Suzuki Splash. That’s confirmed by the model’s owner’s manual and the lighting standards the car was built to meet (ECE R48 in Europe and equivalent ADR lighting rules for local compliance). From factory, the Splash uses conventional halogen headlamps and features low and high beam for safe night driving and daytime visibility.
On this little hatch, the headlights pull more than night duty. They help others spot the car at dawn, dusk, in rain, and through winter gloom. Clear, well-aimed beams reduce eye strain and sharpen road-edge contrast, which is priceless on country roads and during long Kiwi and Aussie kilometres. If bulbs are ageing or the lenses are cloudy, output drops noticeably, so it’s smart to treat headlights as a service item rather than a “fix it when it fails” job.
- Inspect at every service (or 10,000 km): look for dull light, cracked lenses, moisture, and burnt connectors.
- Replace bulbs in pairs to keep beam colour and brightness even left to right.
- Avoid touching the glass of new halogen bulbs, skin oils create hot spots and shorten life.
- Keep lenses clean with car-safe plastic cleaners, avoid harsh solvents that can haze polycarbonate.
- Check aim after any front-end work or if the car’s heavily loaded, mis-aimed lamps can dazzle or under-illuminate.
DIY bulb swap is straightforward. Park safely, switch off, pop the bonnet, and reach the back of the headlamp. Remove the dust cap, unplug the connector, unclip the spring retainer, and ease out the old bulb. Fit the new bulb the same way round, clip it in, reconnect, refit the cap, and test both beams. Not sure on the exact bulb spec? The owner’s manual and the marking on the lamp housing will list it (many Splashes use halogen types commonly noted as H4 or H7—confirm before buying).
If lenses are yellowed, a quality restoration kit can revive clarity. Persistent fogging or water inside usually points to a failing seal or cracked housing—worth sorting promptly to protect the reflector and wiring. A quick headlight check during routine servicing keeps the Splash safe, legal, and comfy to drive after dark.
What bulb type fits a 2008 Suzuki Splash headlight?
Most markets see the Splash running halogen bulbs, commonly H4 (dual-filament) or a combination like H7/H1 depending on trim and headlamp design. The definitive answer is in the owner’s manual or on the headlamp label. It’s smart to read the marking before buying, then replace bulbs in pairs for an even beam.
How do you adjust headlight aim on a 2008 Suzuki Splash?
Use the vertical and horizontal adjusters on the back of each headlamp. Park 3–5 metres from a wall on level ground, set normal tyre pressures and vehicle load, and adjust to achieve a clean cut-off that sits at the correct height without dazzling. If unsure, ask a workshop to set aim during a service or safety inspection/WOF.
Why are the headlights cloudy, and can they be restored?
UV exposure oxidises the plastic, causing yellowing and haze that cuts light output. A quality restoration kit can remove oxidation and add a protective layer. If the inside is dull, or the lens is cracked and letting moisture in, replacement of the assembly is often the better long-term fix.