Your Selected Vehicle
Parts for your 2008 Subaru Tribeca-Tail lights
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Understanding Tail Lights on the 2008 Subaru Tribeca
The 2008 Subaru Tribeca, like most modern vehicles, comes equipped with tail lights as a standard component. Tail lights are an essential part of any car's lighting system, playing a vital role in safety and communication on the road. So, to clear any doubts, tail lights are definitely relevant and fitted to the 2008 Subaru Tribeca.
Tail lights are positioned at the rear of the vehicle and serve a few important purposes. Their primary role is to indicate the position of the car to drivers behind, especially in low-light conditions like dusk, night time, or during bad weather. When the driver switches on the headlights or parking lights, the tail lights illuminate in red, helping other road users judge the distance and presence of the vehicle ahead.
But tail lights are not just about maintaining visibility. They also work alongside brake lights and turn signals to communicate specific actions. When the brakes are applied, the tail lights brighten to warn those behind that the car is slowing or stopping. Similarly, integrated with the turn signal system, they flash to indicate the driver's intention to change lanes or make a turn.
For the 2008 Subaru Tribeca owner, ensuring the tail lights are in proper working order is a key part of regular vehicle maintenance. Faulty or broken tail lights can lead to dangerous situations by reducing the visibility of the car or causing confusion for other drivers. This is not only a safety risk but can also attract fines if the vehicle is found to be in breach of road regulations.
When it comes to servicing the tail lights on the Subaru Tribeca, a few straightforward checks and tasks will keep everything running smoothly. During routine inspections, it's smart to verify that all tail light bulbs are operational, the lenses are clean, and there are no signs of damage or water ingress.
If a tail light bulb has burnt out, replacing it swiftly is important. Fortunately, the process is usually uncomplicated on the Tribeca. Typically, the owner or mechanic needs to access the light assembly through the rear hatch or wheel arch area, remove the burnt bulb, and fit a new one according to the manufacturer's specifications. Using genuine or high-quality replacement bulbs is recommended to ensure proper brightness and longevity.
Besides the bulbs themselves, keeping the lenses clean and clear is another small but effective step in tail light maintenance. Dirt, grime, or fading can reduce the light output and visibility, which defeats the purpose of these safety features. A regular wipe down and occasional polishing can help maintain clarity.
Electrical connections should also be checked to avoid flickering or intermittent failures. Corrosion or loose wiring can sometimes cause tail lights to malfunction. If any issues arise, it is best to have a professional diagnose and fix the problem to avoid ongoing electrical faults or further damage.
Just as importantly, ensuring the tail lights are properly aligned and securely fitted prevents them from becoming loose or misdirected. This not only maintains a neat appearance but also ensures maximum visibility and effectiveness.
For Subaru Tribeca owners living in Australia, regular tail light maintenance is important year-round, but especially when the seasons change and daylight hours shorten. During wet weather or foggy conditions, well-maintained tail lights can significantly improve safety for everyone on the road.
In summary, tail lights are a vital and fully relevant feature on the 2008 Subaru Tribeca. Their main function is to enhance safety by improving visibility and communicating driver intentions to others. Keeping these lights in tip-top condition through regular checks, timely bulb replacements, and lens care is a simple yet highly effective way to maintain the vehicle's safety and roadworthiness. Whether doing it yourself or getting a professional to help, paying attention to the tail lights means safer travels and peace of mind on every drive.