Parts for your 2008 Mitsubishi Outlander-Brake pads

2008 Mitsubishi Outlander Brake Pads — What They Do and When to Replace Them

Based on technical references — including the Mitsubishi Outlander (CW) 2007–2013 Service Manual, Group 35A: Brakes, the Mitsubishi ASA/EPC parts catalogue for the CW-series, and common repair guides such as the Haynes manual for Outlander models of this era — the 2008 Mitsubishi Outlander is equipped with disc brakes that use brake pads (front, and commonly rear as well, depending on market/trim). So brake pads are absolutely relevant and a routine service item on this model.

For this Outlander, brake pads are the hardworking friction material that clamp onto the brake discs (rotors) to slow the vehicle. Press the pedal, the hydraulic system pushes the calliper pistons out, the pads bite the disc, and the car pulls up straight and true. Simple in theory, but they cop plenty of heat, dust, and moisture — especially with school runs, towing the trailer, or weekend trips up the ranges.

Good pads mean confident stopping and shorter braking distances. Worn pads, on the other hand, can glaze over, squeal, or cause vibration and longer stopping distances. Keeping on top of pad condition is a smart, low-cost way to protect the discs and keep the Outlander safe for everyday Kiwi and Aussie roads.

As a rule of thumb, many Outlanders will see pad life anywhere from 30,000 to 70,000 km, but driving style and terrain make a big difference. City commuting with lots of stop–start usually wears pads faster than open-road cruising. A quick visual check at service time is best: if the friction material is approaching the wear limit (around a few millimetres), it’s time to book it in.

• Have pad thickness, even wear, and calliper slide movement checked at every service.
• If you hear squealing, feel pulsing, or notice a soft pedal, get the brakes inspected promptly.
• Replace pads in axle pairs (both fronts or both rears) and bed them in with moderate stops for the first 200–300 km.
• Whenever pads are replaced, assess disc condition and measure disc thickness