Skip to content Skip to navigation menu

Your Selected Vehicle

CATEGORIES

Brands

Part Location

Item Type

Price

Parts for your 2008 Honda Odyssey-Pedal pads

Sort by
Showing 1 - 4 of 4 products

2008 Honda Odyssey Pedal Pads: What They Do and How to Look After Them

Pedal pads are very much a thing on the 2008 Honda Odyssey. Technical sources including the Honda Odyssey 2005–2010 Service Manual (Brake and Parking Brake sections) and the Honda Genuine Parts Catalogue for the 2008 model show replaceable rubber pads fitted to the service brake pedal and the foot-operated parking brake. The accelerator is a moulded pedal assembly and doesn’t use a separate rubber pad.

On this Odyssey, the brake and parking brake pedal pads do the simple but vital job of giving the driver solid, non-slip grip underfoot. That matters in the wet, when shoes are sandy, or after hopping in with damp jandals/thongs. Over time the rubber can harden, glaze, crack, or wear smooth, which reduces friction and can fail a roadworthy (AU) or Warrant of Fitness (NZ). Because these pads are inexpensive and quick to change, they’re a smart preventative maintenance item during routine servicing.

Good workshops will eyeball pedal pads at each service. If the pads are shiny, thin on the corners, cracked, or loose on the metal pedal, it’s time to replace them. The parking brake pedal pad deserves the same attention—drivers often press it with the side of the shoe, which can accelerate wear.

Replacement is straightforward: the old pad peels off, the new one stretches over the pedal plate. A dab of mild soapy water helps the rubber seat evenly. Avoid silicone sprays or petroleum-based cleaners that can leave the surface slippery or degrade the rubber.

  • Check pedal pads every 10,000–15,000 km or 12 months, and after any detailing that might leave residue.
  • Clean with mild soap and water only, dry thoroughly.
  • Replace if glazed, cracked, hardened, shiny, or if the pad can twist on the pedal.
  • Opt for genuine or quality aftermarket pads designed for the 2008 Odyssey to ensure proper fit and grip.

Fitted correctly, fresh pedal pads help keep stopping feel consistent and confidence high. It’s a small job that pays off every time the brake’s needed in a hurry.

FAQs

Does the 2008 Odyssey have a pedal pad on the accelerator?
No. The accelerator is a moulded plastic/metal assembly without a removable rubber pad. The replaceable rubber pads are on the service brake pedal and the foot-operated parking brake.

How often should brake and parking brake pedal pads be replaced?
There’s no fixed interval, but they should be inspected at every service and replaced when worn smooth, cracked, hardened, or loose. In Australia and New Zealand, worn pedal rubbers can cause a failed roadworthy/WOF, so don’t leave them until the last minute.

Can pedal pads be replaced at home?
Yes. It’s a quick DIY—usually 5–10 minutes with no special tools. Remove the old pad, align the new one, and stretch it over the pedal plate. Ensure it’s fully seated around the edges and test grip before driving.

{ "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Does the 2008 Odyssey have a pedal pad on the accelerator?", "acceptedAnswer": { "@type": "Answer", "text": "No. The accelerator is a moulded plastic/metal assembly without a removable rubber pad. The replaceable rubber pads are on the service brake pedal and the foot-operated parking brake." } }, { "@type": "Question", "name": "How often should brake and parking brake pedal pads be replaced?", "acceptedAnswer": { "@type": "Answer", "text": "There’s no fixed interval, but they should be inspected at every service and replaced when worn smooth, cracked, hardened, or loose. In Australia and New Zealand, worn pedal rubbers can cause a failed roadworthy or Warrant of Fitness (WOF), so replacement should not be delayed." } }, { "@type": "Question", "name": "Can pedal pads be replaced at home?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. It’s a quick DIY—usually 5–10 minutes with no special tools. Remove the old pad, align the new one, and stretch it over the pedal plate. Make sure it’s fully seated around the edges and test grip before driving." } } ]}