Parts for your 2008 Honda Elysion-Oil seals

2008 Honda Elysion oil seals

Oil seals are absolutely used on the 2008 Honda Elysion. Technical references that confirm this include Honda’s RR-series Elysion service manual (engine and automatic transaxle sections) and the Honda Electronic Parts Catalogue diagrams, which show front and rear crankshaft oil seals, camshaft seals (on K24A and J-series V6 variants), and transaxle drive-shaft (axle) oil seals. OEM seal suppliers to Honda (such as NOK) also specify radial shaft seals for these locations. So, yes—oil seals are relevant and fitted to this vehicle.

On a 2008 Elysion, oil seals keep engine oil and transmission fluid where they belong while letting rotating shafts spin freely. They prevent drips on the driveway, protect timing components from contamination, and help the auto trans shift smoothly by keeping ATF inside the case. Whether it’s the 2.4‑litre K24A (timing chain) or the J30/J35 V6 (timing belt), the basics are the same: a flexible lip rides on a machined shaft, backed by a spring, holding pressure and blocking grime.

• Engine: front and rear crankshaft seals