Parts for your 2008 Holden Captiva 5-Clutch kit

2008 Holden Captiva 5 Clutch Kit – Applicability and Service Advice

Based on technical references including the Holden Captiva CG (2006–2011) service manual transmission section, the Holden/GM Global Electronic Parts Catalogue, and major clutch catalogues for AU/NZ (e.g., Exedy and LuK application data), a clutch kit is relevant to 2008 Holden Captiva 5 models fitted with the 5‑speed manual gearbox (found on certain 2.4 petrol and 2.0 diesel variants). These manuals use a conventional single dry‑plate clutch with a release bearing and a hydraulic actuation system. Automatic Captiva 5 models use a torque converter and do not use a clutch kit.

For manual 2008 Captiva 5 variants, the clutch kit’s job is simple but crucial: it couples and decouples engine power to the gearbox so shifts stay smooth and the driveline lives a long, happy life. A quality kit typically includes the clutch disc, pressure plate, and release bearing (often a concentric slave cylinder on this platform). On some diesel manuals, a dual‑mass flywheel may be fitted