Parts for your 2008 Holden Barina-Pedal pads

2008 Holden Barina pedal pads — what they do and when to replace them

Technical sources confirm pedal pads are relevant to the 2008 Holden Barina. The Holden/GM service information for the TK Barina (2005–2011), GM’s electronic parts catalogue for the GM Korea T200/T250 platform, and Australian Design Rule 42/04 (General Safety Requirements) all indicate the Barina uses replaceable rubber pedal pads on the brake pedal (all models) and the clutch pedal (manuals). The accelerator on this model is a moulded tread and typically isn’t a separate, replaceable pad.

On a 2008 Barina, the pedal pads are the grippy rubber covers that slip over the metal pedal arms. They’re simple, cheap and surprisingly important — giving the driver consistent, non‑slip control in the wet, with sandy footwells, or after a long commute. The brake and (on manuals) clutch pads are designed to be service items, because rubber hardens and wears down over time.

For servicing, it’s smart to check the pads at each routine visit (about every 10,000–15,000 kilometres, or six months). Roadworthy/WOF inspections in Australia and New Zealand expect pedals to be secure and non‑slip, so tidy pads can save a recheck. Replacement is a quick driveway job: the old pad peels off, the new one stretches over the metal plate, and the lip seats around the edge. Warming the new pad slightly helps it seat cleanly. No adhesives or dressings are needed — in fact, avoid silicone or shine products, as they reduce grip.

Typical signs a Barina needs fresh pedal pads include:

• Smooth, shiny or hardened rubber that feels slippery, especially when wet
• Cracks, splits or missing chunks in the rubber face
• Pad that won’t stay fully seated on the pedal plate

Owners of automatic Barinas will be looking at the single brake pedal pad. Manual cars use two pads (brake and clutch), and it’s common to replace them as a pair so the feel and grip are consistent across both pedals. After fitting, press around the full perimeter to ensure the retaining lip is fully engaged