Parts for your 2007 Toyota Land cruiser-Drive belt

2007 Toyota LandCruiser drive-belt: what it does and when to replace it

Yes, a drive-belt is absolutely used on the 2007 Toyota LandCruiser. Technical references including Toyota factory repair manuals for the 100 Series (UZJ100/HDJ100) and early 200 Series (VDJ200/UZJ200), Toyota’s Electronic Parts Catalogue (EPC), and major belt catalogues from Gates and Dayco all list and diagram accessory drive (serpentine and/or V) belts for these models and engines (2UZ‑FE V8 petrol, 1HD‑FTE 4.2 diesel, and 1VD‑FTV 4.5 V8 diesel).

The drive-belt (often a multi-rib “serpentine” belt) transfers engine power to key accessories. Depending on engine/variant, it spins the alternator, power steering pump, air‑con compressor and, on some setups, the water pump. If it slips or fails, drivers can see warning lights, heavy steering, poor charging, warm air from the air‑con, or even rising coolant temps.

For servicing, the belt is a routine inspection item. Toyota schedules condition checks at regular service intervals