Parts for your 2007 Toyota Kluger-Fuel pump

2007 Toyota Kluger fuel pump – what it does, why it matters, and when to service it

Yes, the 2007 Toyota Kluger uses a fuel pump. Technical references including the Toyota Repair Manual for Kluger/Highlander (XU20/XU40), the Toyota New Car Features (NCF) manual, and the Toyota Electronic Parts Catalog (EPC) all specify an in-tank, electric, low-pressure fuel pump integrated into a fuel delivery module with a level sender and strainer. Whether it’s the 2AZ-FE four-cylinder or the 1MZ-FE/2GR-FE V6, the Kluger’s electronic fuel injection relies on this pump to deliver steady petrol pressure to the injectors.

On a 2007 Kluger, the fuel pump’s job is simple but critical: it draws petrol from the tank, filters it through a strainer, and supplies the engine at the precise pressure the ECU expects. That keeps hot starts crisp, acceleration smooth, and emissions in check. The assembly is typically accessed via an inspection cover under the rear seat base on most trims, making diagnosis and replacement far less of a drama than dropping the tank.

There isn’t a routine replacement interval for the pump on this model