Your Selected Vehicle
Parts for your 2007 Toyota Aurion-Tail lights
LED Autolamps 12V Stop/Tail/Indicator Assembly 3 Lamps With 108 LEDs Black Bracket - 80BARR
Fitment Notes:
LED Autolamps 12/24V 16 LED Stop/Tail Indicator Lamp Black Bracket Blister Pack - 201BSTIM
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
Narva 9 - 33 Volt LED Rear Stop/Tail And Direction Indicator Lamp Kit (Red/Amber) - 94526
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Assembly With 4 Lamps - 80BARRWM
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Lamp 97 LEDs With Black Bracket - 200BARWM
Fitment Notes:
Hella DuraLED Combi-S Heavy Duty 12/24V LED Stop/Tail/Indicator Lamp with6M Lead - 23786MBULK
Fitment Notes:
LED Autolamps 12/24 Multi Volt Stop/Tail/Indicator/Reverse Assembly Lamp With 108 LEDs - 80BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Reflex Reflector 2 Pack - 151BAR2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly 3 Lamps With 153 LEDs - 125BARWM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator/Reverse Assemnly Lamp With 108 LEDs - 80BARW
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp Black Bracket With 40cm Wire - 80BSTIM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp 190x95x28mm Blister Pack - 280ARM
Fitment Notes:
Narva 9-33 Volt L.E.D Reverse Lamp White with Red L.E.D Tail Ring and Black Base - 94312
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Right Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312R
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail and direcion indicator and reverse lamp with in built retro reflector and 0.5m hard wired cable - 97310
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable, Bulk Pack Of 4 - 97010-1/4
Fitment Notes:
Narva Model 70 Rear Stop/Tail /Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable And Dt Plug - 97000-1-D
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Flood Pattern 4 LED Work Light - LEDWORK-C4-FLOOD
Fitment Notes:
Narva 9-33 Volt LED Rear Stop/Tail, Left Hand Squential direcion indicator and reverse lamps with in built retro reflector and 0.5m hard wired cable - 97312L
Fitment Notes:
Repco Wireless 1.5M Trailer Board With Rear Combination Lights 20 Metre Range - RTBW
Fitment Notes:
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Everything You Need to Know About Tail Lights on the 2007 Toyota Aurion
The 2007 Toyota Aurion, a popular mid-size sedan in Australia, is definitely fitted with tail lights. Tail lights are a crucial part of any vehicle's lighting system, and the Aurion is no exception. These lights play a vital role in ensuring road safety, especially when driving in low-light or adverse weather conditions. So, what exactly do tail lights do, and why are they important for the Aurion? Let's dive into the details.
Tail lights are designed to illuminate the rear of the vehicle whenever the headlights are switched on, typically at dusk, night, or during poor visibility conditions. They emit a red light that signals the car's position to other road users, which helps prevent collisions from behind. Unlike brake lights, which become brighter only when the driver presses the brake pedal, tail lights provide a continuous glow, alerting drivers following the Aurion that there's a vehicle ahead.
For the 2007 Aurion, the tail lights are integrated into the rear light cluster, which also contains indicators, reverse lights, and brake lights. The red lens covering the tail light bulbs is specifically engineered to ensure the light output meets Australian design and safety standards. This setup guarantees that the Aurion is clearly visible from a distance while maintaining the classic, sleek design the model is known for.
Since so much depends on the tail lights, keeping them in good working order is an essential part of maintaining a 2007 Aurion. Faulty or broken tail lights can not only compromise safety but can also lead to fines or failed vehicle inspections. It's easy to overlook these lights because they are often on when visibility is low, but regular checks can catch issues before they become serious.
When servicing the tail lights on the Aurion, it's a good idea to:
- Check that all bulbs are working correctly. A quick walk behind the car with someone helping you can make this easy.
- Make sure the lenses are clean and free from cracks or cloudiness. Dirt and damage can reduce visibility quite a bit.
- Inspect the wiring and sockets for any signs of corrosion or wear, especially if the car is older or exposed to harsh weather.
Replacing bulbs in the 2007 Aurion tail lights is typically straightforward. Most bulbs can be accessed by removing the rear light cluster from inside the boot. The bulbs are usually a standard size, but it's always best to check your owner's manual or a trusted automotive parts supplier to get the exact type needed. Using genuine or high-quality replacement bulbs ensures proper brightness and longevity.
It's also worth noting that some Aurions may have upgraded to LED tail lights in later model years, but for the 2007 version, standard incandescent bulbs are the norm. LEDs, while becoming popular, are a bit different to replace and generally last much longer, though the 2007 Aurion's original setup does a fine job as-is.
Tail light maintenance is more than just swapping bulbs. Keeping the external housing clean is key because grime, dust, and road salt can build up and dull the lenses. Simply wiping them down with a damp cloth and a mild cleaner now and then can improve visibility dramatically. For lenses that have become faded or yellowed over time, restoration kits are available and can bring brightness back without the need for a full replacement.
If the tail light assembly itself is damaged - for example, from minor collisions or accidents - replacing the whole cluster is the safest option to ensure proper light output and compliance with legal standards. Luckily, replacement parts for the 2007 Toyota Aurion are widely available from dealerships and aftermarket suppliers.
Another handy tip is to incorporate tail light checks into your routine vehicle maintenance schedule. Prior to longer trips or in preparation for winter months when daylight hours shrink, a quick inspection can save headaches and keep the Aurion safe on the road. It's also a good idea to ask your mechanic to verify the lights during regular servicing.
Overall, tail lights are a simple yet vital safety feature that the 2007 Toyota Aurion drivers should keep an eye on. Whether it's replacing bulbs, cleaning lenses, or addressing any electrical issues, looking after the tail lights helps keep the Aurion visible and protected against rear-end accidents. So the next time you hop in your Aurion and drive off at dusk, remember those glowing red lights at the back are there for your safety and everyone else sharing the road.