Your Selected Vehicle
Parts for your 2007 Nissan Tiida-Tail lights
Repco 12-24V LED Rear Combination Lamp Stop/Tail/Ind/Rev 100X275X22mm - RLT275STIR
Fitment Notes:
Narva Model 70 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable - 97010-1
Fitment Notes:
LED Autolamps 355 Series Multi Volt Black Stop/Tail/Indicator/Reverse/Reflector LHS & RHS Twin Blister Pack - 355BARWM-2
Fitment Notes:
LED Autolamps 12/2V Maxilamp LED Stop/Tail/Indicator/Reflector Black Chrome Bolt Mount - MAXILAMPC1XCE
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator With 18 Square LEDs Twin Blister - 135ARM/2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Clear Lens Chrome Bracket - 82CARW
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Assembly With 123 LEDs - 100BARWM
Fitment Notes:
Stedi C-4 Black Edition LED Light Cube Diffused Pattern 4 LED Work Light - LEDWORK-C4-DIFFUSE
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse/Reflector Mini Jumbo Twin Blister - 420ARRWM2
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator/Reverse Assembly Chrome Bracket Blister Pack - 82CARRW
Fitment Notes:
Stedi C-4 Black Edition Flush Mount 4 LED Work Light Flood Beam - LEDFLUSH-C4-FLOOD
Fitment Notes:
LED Autolamps MultiVolt R.H.S Stop/Tail/Indicator Assembly 128 Round LEDs - 125BARMR
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket - 200BARM
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Assembly 72 LEDs With Black Bracket 190x100x28mm - 80BARM
Fitment Notes:
Narva 9-33 Volt LED Reverse (White) With Red LED Tail Ring, 155mm Contoured Chrome Cover - 95628
Fitment Notes:
LED Autolamps RHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284RHS
Fitment Notes:
LED Autolamps LHS, Stop/Tail/SEQ-Indicator/Reverse/Reflector 12/24V 284 X 100 X 37mm, DT04 Connector - SO284LHS
Fitment Notes:
9-33 Volt LED Reverse, Rear Direction Indicator and Stop Lamps with LED Tail Rings - 94365C
Fitment Notes:
LED Autolamps Rear Taillight Harness To Suit MY22 Ranger / MY20 Ram Plug To Bare Wires - PATCH-RAM.UNI
Fitment Notes:
9-33 Volt LED Rear Direction Indicator and Twin Stop Lamps with LED Tail Rings - 94364C
Fitment Notes:
LED Autolamps 385 Series Rear Combination Lamp LHS with 7 core plug - 385ARWMLCSB
Fitment Notes:
Understanding and Maintaining Tail-Lights on the 2007 Nissan Tiida
Tail-lights are a standard and essential component fitted to the 2007 Nissan Tiida. These lights play a vital role in vehicle safety, ensuring the car remains visible to other road users during low-light conditions such as night, fog, or rain. The Tiida, a popular compact hatchback or sedan in many markets including Australia, relies on functioning tail-lights as part of its overall lighting system to comply with road safety regulations.
The tail-lights are positioned at the rear of the vehicle and illuminate red whenever the headlights or parking lights are turned on. This constant glow serves to signal the presence and width of the vehicle to drivers coming up from behind, helping prevent rear-end collisions. They complement brake lights, which get brighter when the brake pedal is pressed, warning other drivers that the car is slowing or stopping.
On the 2007 Nissan Tiida, tail-lights are integrated into a combination rear lamp cluster that usually includes the brake lights, turn indicators, reverse lights, and sometimes side marker lights. This integration means the Tiida's tail-light assembly not only improves visibility but also aids communication of the driver's intentions, such as turning or reversing.
Performing regular maintenance and knowing when to replace tail-lights is crucial for safety and vehicle legality. If a tail-light is not functioning properly, other drivers might not be able to see the vehicle clearly, increasing the risk of accidents. Additionally, driving without a working tail-light can attract fines or even cause the vehicle to fail roadworthy inspections.
Here are some tips and advice on tail-light replacement and maintenance for the 2007 Nissan Tiida:
- Routine Checks: It's a good idea to check tail-lights regularly, especially during routine car servicing or before long trips. Simply turn on the headlights and step around to the back of the car to verify the tail-lights glow steadily. Ask a friend to press the brake pedal while you check that the brake lights brighten appropriately.
- Replacing Tail-Light Bulbs: When a tail-light bulb burns out, it's important to replace it promptly. The 2007 Nissan Tiida typically uses standard globe bulbs that can be changed without too much hassle. Refer to the owner's manual for the exact bulb type, but common replacements include 21-watt dual filament bulbs for brake and tail functions.
- Accessing the Bulbs: Access to the tail-light assembly is usually via the inside of the boot. The rear trim panel can be gently removed or opened up to reach the bulb holders inside. This makes the replacement process fairly straightforward and DIY-friendly for most owners.
- Checking the Tail-Light Housing: Sometimes the tail-light lens or housing can get cracked or fogged due to minor impacts or age-related wear. If moisture gets inside the assembly, it can cause bulbs to fail quicker or short circuits. In such cases, replacing the entire tail-light assembly might be necessary.
- Electrical Connections: Make sure the wiring and connectors are in good condition without any corrosion or loose contacts. Poor electrical connections can cause intermittent tail-light operation or total failure, creating a safety hazard.
- Legal Requirements: Tail-lights must conform to Australian Design Rules (ADR) to be road legal. This means the replacement bulbs and assemblies should be approved and the lights should emit the correct intensity and colour. Using non-compliant parts can result in failed inspections and penalties.
Maintaining good working tail-lights is one of those simple measures that can make a big difference on the road. For Tiida owners, it is recommended that tail-lights be checked as part of the routine vehicle servicing schedule, typically every 6 to 12 months, depending on usage. Some mechanics and service centres include testing of all exterior lights as part of their standard checks.
When replacing tail-light bulbs, it's always a good idea to replace them in pairs. If one bulb has failed, the other may soon follow due to similar wear and tear. This ensures consistent light output and reduces the chance of sudden failures.
On the 2007 Nissan Tiida, the tail-lights contribute not only to safety but also to the vehicle's neat rear-end styling. Replacing or repairing tail-light assemblies with genuine or high-quality aftermarket parts helps maintain the car's appearance and functionality over its lifespan.
In short, tail-lights on the 2007 Nissan Tiida are very much relevant and used. They help make the vehicle visible, communicate a driver's intentions to others, and are a legal requirement for safe driving. Keeping them in good shape with proper maintenance and timely bulb replacement is a basic car care routine that benefits both the driver and everyone else on the road.