Parts for your 2007 Nissan Tiida-Pedal pads

2007 Nissan Tiida pedal pads – what they do and when to replace them

Based on the Nissan C11-series Tiida Service Manual (Brake and Clutch sections), the Nissan FAST electronic parts catalogue, and the owner’s handbook, the 2007 Nissan Tiida is fitted with replaceable rubber pedal pads on the brake pedal, and on the clutch pedal for manual-transmission models. The accelerator pedal is a moulded assembly and typically does not use a separate rubber pad. So yes, pedal pads are relevant to the 2007 Tiida, and they’re a small but important safety item.

On the Tiida, pedal pads provide grippy, non-slip contact so shoes don’t slide when braking or clutching, especially in wet conditions. They also help the car meet roadworthy and WOF requirements in Australia and New Zealand, which expect serviceable, non-slip pedal surfaces. If a pad goes glossy, hard, cracked, or starts to peel off, braking feel can suffer and the vehicle may fail inspection.

There’s no fixed replacement interval, but it’s smart to inspect pads at every service. Daily commuting, wet-weather driving, work boots, and silicone dressings on floors can all speed up wear. If the brake pedal surface looks smooth or you can see the metal plate underneath, it’s time for a new pad. Manual Tiidas should get the clutch pad checked at the same time.

• Signs it’s due:
  • Shiny, slippery surface or hardened rubber
  • Cracks, tears, or edges lifting off the pedal
  • Pad feels thin or you can see pedal metal
• Quick DIY fitment (no special tools):
  • Pull off the old pad by hand
  • Warm the new pad in hot water to soften
  • Hook the bottom lip first, then work the pad over the pedal face until the lip seats all the way around
• Care tips:
  • Clean with mild soap and water, avoid silicone or tyre shine on or near pedals
  • Check floor mats don’t ride up under the pedals

Quality matters. OE-style rubber pads fit snugly, restore grip, and feel right underfoot. For automatics, replacing the brake pad alone is fine. For manuals, do brake and clutch together so pedal feel is consistent. If the pedal pad won’t seat or the pedal plate looks bent or corroded, have a technician inspect it—proper pedal geometry and return are critical for safe operation.

Popular questions about 2007 Nissan Tiida pedal pads

Does a 2007 Nissan Tiida have pedal pads on automatics and manuals?
Yes. All 2007 Tiidas have a replaceable brake pedal rubber pad. Manual models also have a clutch pedal pad. The accelerator pedal is usually a one-piece plastic/metal unit without a separate rubber pad.

How often should pedal pads be replaced on a Tiida?
There’s no set kilometre interval. Inspect at each service and replace when the surface is slick, cracked, or thin. Many pads last years, but high-use city cars or wet-weather driving can wear them sooner.

Are aftermarket metal pedal covers legal in Australia or New Zealand?
They can be, provided they’re securely fitted and have a non-slip surface. If they’re slippery, loose, or interfere with pedal travel, they can fail WOF/RWC. Sticking with OE-style rubber pads is the simplest way to stay compliant.