Skip to content Skip to navigation menu

Your Selected Vehicle

Brands

Price

Parts for your 2007 Lexus Is-Brake fluid

Sort by
Toledo One-Man Brake Bleeder Kit - 310261

Toledo One-Man Brake Bleeder Kit - 310261

$17
Fitment Notes:
See More
Repco Brake Bleeder & Fluid Extractor - RST240

Repco Brake Bleeder & Fluid Extractor - RST240

$97
Fitment Notes:
See More
Repco Brake & Fuel Line Clamp - RST196

Repco Brake & Fuel Line Clamp - RST196

$14
Fitment Notes:
See More
Repco Brake Fluid Tester - RST239

Repco Brake Fluid Tester - RST239

$61
Fitment Notes:
See More
Repco One Man Brake Bleeder - RST149

Repco One Man Brake Bleeder - RST149

$22
Fitment Notes:
See More
Repco Brake Bleeder Kit 6pc - RST185

Repco Brake Bleeder Kit 6pc - RST185

$173
Fitment Notes:
See More
Repco Vacuum & Brake Bleeding Kit - RTT1071

Repco Vacuum & Brake Bleeding Kit - RTT1071

$249
Fitment Notes:
See More

Explore 4WD & Adventure

Toledo Brake Line Pinching Pliers - 321028
Clearance

Toledo Brake Line Pinching Pliers - 321028

$16
Fitment Notes:
See More
Toledo Fluid Change Syringe 200Ml - 305152

Toledo Fluid Change Syringe 200Ml - 305152

$92
Fitment Notes:
See More
Toledo Fluid Change Syringe 1.5L - 305151

Toledo Fluid Change Syringe 1.5L - 305151

$185
Fitment Notes:
See More
Toledo Vacuum Pump Bleeder Kit - 310012

Toledo Vacuum Pump Bleeder Kit - 310012

$333
Fitment Notes:
See More
Toledo Fluid Quick Lock Fuel Set - 321034

Toledo Fluid Quick Lock Fuel Set - 321034

$55
Fitment Notes:
See More
Showing 1 - 13 of 13 products

Brake Fluid for the 2007 Lexus IS: What You Need to Know

The 2007 Lexus IS is a well-engineered vehicle that relies on a conventional hydraulic braking system, which means brake fluid is an essential part of its braking performance. Brake fluid is not a forgotten component or something unusual for this model, it plays a vital role in ensuring the vehicle's brakes operate safely and effectively.

Brake fluid is a specialised hydraulic fluid used in the brake system to transfer force into pressure, amplifying the braking effort applied at the pedal and transmitting it to the calipers or wheel cylinders. When the driver presses the brake pedal, the brake fluid flows through the brake lines, creating the hydraulic pressure needed to clamp the brake pads onto the discs or push the shoes outward against the drums, slowing the car down.

For the 2007 Lexus IS, like most modern vehicles, the recommended brake fluid type usually falls under DOT 3 or DOT 4 specifications. These fluids are glycol-based and have the necessary boiling point to cope with the heat generated by the brake system during regular driving and emergency stops. Using the right type of brake fluid is critical because improper fluids can cause system damage or reduce braking efficiency.

One of the main reasons brake fluid maintenance is so important is due to its hygroscopic nature. This means that the brake fluid absorbs moisture from the air over time. Even though the fluid is sealed inside the brake lines and reservoir, tiny amounts of water vapour can still find their way in through microscopic imperfections, worn seals, or when the system is opened for servicing. This moisture reduces the boiling point of the brake fluid, which leads to the risk of brake fade or failure during heavy braking conditions, as water vapour can turn into gas and compress, unlike the fluid.

Regular replacement of the brake fluid in the 2007 Lexus IS is an essential part of service and maintenance to keep the braking system reliable and responsive. Dealers and service centres typically recommend a brake fluid flush every two years, or approximately every 30,000 kilometres, but this interval might vary based on driving habits or if the vehicle is used in demanding conditions such as mountainous terrain or towing.

Here are some important reasons to keep on top of brake fluid maintenance in the Lexus IS:

  • Safety: Brake fluid that has absorbed water is less effective, increasing stopping distances and potentially causing brake failure.
  • Brake system longevity: Moisture inside the brake fluid can cause corrosion in the master cylinder, brake lines, and calipers, leading to costly repairs.
  • Consistent pedal feel: Fresh brake fluid ensures the brake pedal feels firm and responsive anytime brakes are applied.

When it comes to servicing the brake fluid, the process generally involves flushing out the old fluid completely and replacing it with fresh fluid of the correct specification. Mechanics often perform a brake fluid flush by opening the bleeder valves on each wheel to remove the old, contaminated fluid and then refill the system, making sure no air bubbles remain trapped inside, which would reduce braking effectiveness.

Owners should always ensure that the replacement fluid meets the manufacturer's recommended specification for the 2007 Lexus IS. Using the wrong type or lower quality brake fluid can cause damage or poor braking performance. Also, when storing brake fluid containers, keep them tightly sealed and away from moisture to maintain the fluid's integrity.

For those performing their own brake fluid changes, it is vital to handle the fluid carefully, avoid spills on the paintwork as brake fluid can damage car paint, and always properly dispose of old fluid according to local regulations.

In everyday use, it is a good idea to occasionally check the brake fluid reservoir under the bonnet to make sure the fluid level is within the recommended range. A significant drop in fluid level can indicate worn brake pads or a leak in the system, both of which require prompt attention.

Brake fluid might seem like a simple aspect of the car, but it is absolutely crucial for maintaining the safety and reliability of the 2007 Lexus IS' braking system. Regular checks and timely replacements help ensure the brakes remain effective throughout the car's life, providing peace of mind for drivers on the road.