Your Selected Vehicle
Parts for your 2007 Holden Captiva 5-Tail lights
LED Autolamps 12V LED Stop/Tail/Indicator Lamp With Licence Plate Lamp Blister Pack Containing Left & Right Lamps - 99ARL2
Fitment Notes:
LED Autolamps Stop/Tail/Indicator Diffused Tail Function With Sequential Indicator - 520ARRMB
Fitment Notes:
LED Autolamps 12V 2x Stop/Tail/Indicator Boat Trailer Lamps with Licence Plate Lamp, includes Left & Right Side - 207BARLP2
Fitment Notes:
Explore 4WD & Adventure
LED Autolamps 12V LED Stop/Tail/Indicator/Licence Plate Lamp with Reflex Reflector - 99ARL
Fitment Notes:
LED Autolamps 12V Stop/Tail Strip Lamp With 10 Square LEDs Recessed Mount - 235R12
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator/Reverse Diffused Tail Function With Sequential Indicator - 520ARWM-2
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Ind/Rev With Try Me Function Diffused Tail With Sequential Indicator - 385ARRMB
Fitment Notes:
LED Autolamps 12/24V Maxilamp Stop/Tail/Indicator/Reflector Single Lamp - MAXILAMP1XRE
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator Lamp With Reflex Reflector 100x100x25mm - 100BAR
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator Lamp With Reflex Reflector Blister Pack 1 pce - 150ARM
Fitment Notes:
LED Autolamps 12/24V LED Stop/Tail/Indicator/Reverse Lamp 200x50x28mm Twin Blister - 200BIRSTME2
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reverse Lamp With Inbuild Reflectors - 283ARWM
Fitment Notes:
LED Autolamps 12/24V 280 Mini Jumbo Stop/Tail/Indicator Lamp Blister Pack - 280ARRM
Fitment Notes:
LED Autolamps 12/24V Stop/Tail/Indicator/Reflector With Licence Plate Lamp - 99ARLM
Fitment Notes:
LED Autolamps 12V LED Stop/Tail/Indicator Lamps With Reflector Twin Blister - 101BAR2
Fitment Notes:
Narva Model 72 Rear Stop/Tail/Indicator Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 12V/24V Maxilamp 5 Lamp Combination Stop/Tail/Indicator/Reverse/Reflector - MAXILAMPC5XRW
Fitment Notes:
LED Autolamps 12V Stop/Tail/Indicator 380 Series Strip Lamps In Double Black Bracket - 380BAR12
Fitment Notes:
Narva Model 72 Rear Stop/Tail/Indicator/Reverse Lamp With In-Built Retro Reflector, With 0.5M Of Cable
Fitment Notes:
LED Autolamps 174 Series Stop/Tail/Indicator Lamp 12/24V, Surface Mount, 40cm Cable - 174ARMB
Fitment Notes:
LED Autolamps Multi Volt Stop/Tail/Indicator Lamp With Reflex Reflectors Grey Base Blister Pack 1 pce - 100ARM
Fitment Notes:
Hella 12/24V LED Stop/Tail/Indicator/Number Plate Lamp with 6M Lead - 23956MBULK
Fitment Notes:
Tail Lights on the 2007 Holden Captiva 5: Purpose and Maintenance Tips
The 2007 Holden Captiva 5 comes equipped with tail lights as a standard safety feature, much like the majority of modern vehicles. Tail lights play an essential role in road safety, especially during low visibility conditions such as night driving, fog, or rain. They help other drivers see a vehicle from behind, reducing the risk of rear-end collisions.
Tail lights are typically located at the rear corners of the vehicle, including the Holden Captiva 5. When the driver switches on the headlights or the parking lights, the tail lights illuminate with a red glow, signalling the position and width of the car to other motorists. They also flash brighter when the driver applies the brakes, quickly alerting trailing vehicles that the car is slowing down or stopping. Some tail light units on the Captiva 5 may also incorporate indicators or reverse lights, but their primary function remains the same - to enhance visibility and safety.
Because the tail lights are so crucial, maintaining them is something all Captiva owners should regularly consider during servicing. Tail light maintenance doesn't just improve safety, it also ensures compliance with Australian road regulations, as driving with faulty or broken tail lights can lead to fines or vehicle inspection failures.
Servicing tail lights involves several simple checks and steps. Here's what to keep in mind for the 2007 Holden Captiva 5:
- First, inspect the lenses for any cracks or damage. The tail light covers protect the bulbs and internal wiring from moisture, dust, and impact. Damage can allow water to seep in, causing the bulbs to fail or corrode the electrical connections.
- Check that the tail lights illuminate properly when the headlights or parking lights are turned on. This can be done by switching on the vehicle's lights and walking to the rear to see if both tail lights are functioning and glowing evenly.
- Test the brake lights specifically by pressing the brake pedal or asking someone to help. The brake lights should glow noticeably brighter than the running tail lights, providing a clear signal to traffic behind.
- Because bulbs have a limited lifespan, it's advisable to replace any dim or flickering tail light bulbs promptly. Using genuine replacement bulbs tailored for the Captiva 5 ensures compatibility and long-term reliability.
- During servicing, the wiring and sockets should also be checked for signs of corrosion or loose connections. These issues can lead to intermittent light failures or complete outages, impacting safety.
If a bulb replacement is needed, the 2007 Holden Captiva 5 makes the process relatively straightforward. The tail light assemblies can be accessed through the rear of the vehicle, often by removing screws or clips securing the light cluster. Care should be taken to follow the owner's manual instructions or consult a professional if unsure, as improper handling can damage the assembly or electrical components.
Beyond bulb replacement, regular cleaning of the tail light lenses is a good habit. Over time road grime, mud, and oxidation can dull the lens surface, reducing brightness and effectiveness. A gentle clean with automotive plastic polish or a mild detergent can restore the clarity and keep the lights shining bright.
It's worth noting that tail lights are not just a legal requirement - they are a fundamental part of the car's communication system on the road. For the 2007 Holden Captiva 5 owner, keeping these lights in top condition ensures safer night driving, better visibility in bad weather, and peace of mind that the vehicle meets all regulatory requirements.
Modern tail lights have also improved in terms of technology, with some models featuring LED bulbs for longer life and greater brightness. While the 2007 Captiva 5 likely came with standard filament bulbs, upgrading to LED replacements is an option for some owners looking to enhance performance and reduce maintenance frequency.
Overall, tail light maintenance on the Holden Captiva 5 is a simple yet important part of routine vehicle care. During regular servicing intervals, checking the tail lights should be a priority, alongside other basic checks such as tyres, brakes, and fluid levels. This little extra attention can make a big difference in safety on the road and help avoid unnecessary repairs or legal hassles down the track.