Parts for your 2006 Toyota Vitz|yaris-Wiper blades

2006 Toyota Vitz/Yaris Wiper Blades

Wiper blades are absolutely fitted to the 2006 Toyota Vitz/Yaris and are essential kit on this model. Technical references that confirm this include the 2006 Toyota Vitz/Yaris (XP90) Owner’s Manual, the Toyota Electronic Parts Catalogue (EPC) listing front and rear wiper blade and refill part numbers, plus major fitment guides from brands like Bosch and Trico for that year and platform. In short, they’re relevant to every-day driving and to safety checks in Australia and New Zealand.

On this Vitz/Yaris, the front wipers clear rain, road film, and bug splatter to keep the windscreen crystal clear, while most hatchbacks in this generation also have a rear wiper for better visibility out the back window in wet or salty conditions. Typical sizes many owners see are 650 mm (driver), 350 mm (passenger), and about 300 mm for the rear on hatch models, sedan variants don’t have a rear wiper. Always confirm by the owner’s manual, vehicle build plate, or a reputable fitment chart, as trim and market can vary.

For servicing, plan on replacement roughly every 6–12 months, faster if the car lives outdoors, near the coast, or clocks up lots of kilometres in harsh UV. Signs it’s time to swap them out include:

• Streaks, missed patches, or a rainbow haze on the glass
• Chatter, squeaks, or judder across the screen
• Split, nicked, or hardened rubber edges

Simple maintenance stretches blade life and keeps vision sharp. Clean both the windscreen and the rubber edges regularly with proper washer fluid or mild soapy water, not harsh solvents. Top up the washer reservoir with quality additive, check the wiper arm spring tension, and make sure the blade sits flat across the curve of the glass. If the rubber is worn but the frame is mint, refills can be a smart, cheaper option—otherwise replace the complete blade. Don’t run wipers on a dry screen, and in frosty areas, free the blade from the glass before switching them on.

DIY replacement is straightforward: match the length and adaptor style (commonly a hook fitting), park the arms up, press the tab to release, slide off, then click the new blade into place. Finish with a quick test on a wet screen to check for smooth, quiet sweeps. It’s a small job that pays back in clear vision and safer driving, rain or shine.

Popular questions about 2006 Toyota Vitz/Yaris wiper blades

What size wiper blades fit a 2006 Toyota Vitz/Yaris?
The majority of 2006 Vitz/Yaris hatchbacks take 650 mm (driver), 350 mm (passenger), and around 300 mm on the rear. Sedan variants (Belta) generally use 650/350 mm up front and no rear wiper. Always confirm against the owner’s manual or a trusted fitment guide, as regional trims can differ.

How often should the blades be replaced in Australia or New Zealand?
Every 6–12 months is a good rule, but cars parked outside in strong UV, coastal salt air, or heavy road grime may need new blades more often. If there’s streaking, squeaking, or split rubber, replace them straight away for the best wet-weather visibility.

Can silicone wiper blades be used on this model?
Yes, silicone blades are commonly compatible and can offer smooth, quiet operation and good UV resistance. Match the correct lengths and adaptor type, and ensure they sit flat on the glass. Whether rubber or silicone, correct fitment and a clean windscreen make the biggest difference.