Parts for your 2006 Toyota Blade-Clutch kit

2006 Toyota Blade clutch-kit — is it even a thing?

For anyone hunting a clutch-kit for a 2006 Toyota Blade, here’s the straight answer: this model doesn’t use a traditional clutch, so a clutch-kit isn’t applicable. Toyota’s Japanese-market brochures and owner’s manuals for the Blade (2006 launch) list the 2.4-litre model with Super CVT‑i and the later Blade Master V6 with a 6‑speed automatic. Toyota’s technical literature and parts catalogues for these drivetrains show a torque converter and flexplate, not a clutch disc and pressure plate assembly. No factory manual gearbox option means no conventional clutch-kit on this vehicle.

Why’s that the case? The Super CVT‑i in the 2.4 uses a torque converter to couple the engine to the transmission, and ratio changes are handled by a steel belt and variable pulleys. The Blade Master’s 6‑speed auto also uses a torque converter. Both systems do away with the dry friction clutch you’d see in a manual, so there’s nothing to replace as a “clutch-kit”. The steering-wheel “+/-” or “7‑speed” modes are simulated shift steps in the CVT or programmed shifts in the auto, not evidence of a manual clutch hiding under the bonnet.

What should owners look after instead? Keeping the transmission healthy is key. That means using the correct Toyota WS-spec fluid and servicing the CVT/auto in line with Toyota’s schedule and local conditions. Many workshops in Australia and New Zealand recommend CVT fluid inspections and changes around 60,000–80,000 km if the car sees plenty of stop–start, towing, or hot-climate work. Smooth take-offs, a healthy cooling system, and prompt attention to shudders or flares go a long way to extending transmission life.

• No clutch-kit is fitted from factory, part listings show torque converter/flexplate, not clutch components (Toyota EPC/owner’s information).
• Service focus: correct WS fluid, temperature management, and timely inspections.
• If someone’s done a rare manual conversion, that’s a custom setup—standard Blade clutch-kits won’t apply.

Technical basis: Toyota Japan Blade launch materials (2006) specify Super CVT‑i for 2.4L, Blade Master V6 uses a 6‑speed automatic. Toyota owner and service information for these transmissions detail torque converters and do not include clutch service intervals.

Popular questions

Does a 2006 Toyota Blade have a clutch?
No traditional manual clutch. The 2.4 runs Super CVT‑i with a torque converter, and the V6 uses a 6‑speed auto. There’s no clutch disc or pressure plate to replace, so a clutch-kit doesn’t apply.

What should be serviced instead of a clutch on a Blade?
Stick to transmission care: use Toyota WS fluid, check for software updates, keep the trans cooler and radiator clean, and have the CVT/auto inspected on time—especially if driving in heavy traffic or heat.

My Blade shudders taking off—do I need a clutch replacement?
Shudder on take-off is typically fluid degradation, a torque converter issue, or CVT calibration, not a failed manual clutch. Get the fluid condition checked, scan for transmission codes, and have a specialist road-test it.